Compressor performance influenced by distribution of tip clearance of centrifugal impeller

Yasutoshi Senoo, Hiroshi Hayami, Masahiro Ishida, Kohji Nakashima, Li Fuzhong

研究成果: ジャーナルへの寄稿学術誌査読

抄録

The tip-clearance effects of centrifugal impellers are usually related to the clearance/bladewidth ratio at the impeller exit, and the relationship has been experimentally examined. In some cases the clearance was changed by the axial movement of the shroud casing relative to the impeller, and as a result the radial clearance in the inducer was hardly changed. If the tip clearance is changed uniformly along the shroud, the effects of tip clearance must be larger than predicted based on those experiments. In the case of a centrifugal compressor with 6 : 1 pressure ratio, the decrement of impeller efficiency due to tip clearance is theoretically examined for five types of clearance-distribution along the shroud, and significant influences of the radial clerance in the inducer are demonstrated.

本文言語英語
ページ(範囲)496-499
ページ数4
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series B
53
486
DOI
出版ステータス出版済み - 1987
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Compressor performance influenced by distribution of tip clearance of centrifugal impeller」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル