Computational fluid dynamics modeling and parameterization of the visible light photocatalytic oxidation process of toluene for indoor building material

Koki Nakahara, Takahiro Yamaguchi, Eunsu Lim, Kazuhide Ito

研究成果: ジャーナルへの寄稿記事

7 引用 (Scopus)

抄録

Poor indoor environmental conditions caused by the presence of gas-phase/aerosol-phase contaminants are thought to be potential triggers of illnesses, leading to productivity losses. In recent decades, the photocatalytic oxidation (PCO) process has attracted attention because of its potential to purify indoor air polluted with volatile organic compounds (VOCs), especially at low concentration levels. Titanium-dioxide (TiO2)-bound building materials have been extensively studied for the oxidation of indoor VOCs. In this study, kinetic studies were carried out to evaluate the PCO of toluene in the gas phase, over TiO2-bound building materials, using a 20 l small test chamber. A Langmuir–Hinshelwood (L–H)-type model, for reproducing the PCO process over TiO2-bound building materials, was developed as a function of the toluene concentration, illumination intensity, and humidity levels. The parameters of the L–H model were determined using the hybrid identification procedure of computational fluid dynamics (CFD) simulations and a 20 l small test chamber experiment. By using this hybrid identification method, PCO kinetic parameters were estimated with reference to the concentration in viscous-sub layer. Finally, CFD simulations were also carried out under the same boundary conditions as those used in the chamber experiments to evaluate the prediction accuracy.

元の言語英語
ページ(範囲)298-308
ページ数11
ジャーナルSustainable Cities and Society
35
DOI
出版物ステータス出版済み - 11 2017

Fingerprint

Parameterization
computational fluid dynamics
chamber
toluene
Toluene
parameterization
Computational fluid dynamics
oxidation
Oxidation
modeling
simulation
Volatile organic compounds
experiment
volatile organic compound
environmental factors
illness
kinetics
productivity
air
identification method

All Science Journal Classification (ASJC) codes

  • Geography, Planning and Development
  • Civil and Structural Engineering
  • Renewable Energy, Sustainability and the Environment
  • Transportation

これを引用

Computational fluid dynamics modeling and parameterization of the visible light photocatalytic oxidation process of toluene for indoor building material. / Nakahara, Koki; Yamaguchi, Takahiro; Lim, Eunsu; Ito, Kazuhide.

:: Sustainable Cities and Society, 巻 35, 11.2017, p. 298-308.

研究成果: ジャーナルへの寄稿記事

@article{5487bf506e39455ebb02d7f80ad6df08,
title = "Computational fluid dynamics modeling and parameterization of the visible light photocatalytic oxidation process of toluene for indoor building material",
abstract = "Poor indoor environmental conditions caused by the presence of gas-phase/aerosol-phase contaminants are thought to be potential triggers of illnesses, leading to productivity losses. In recent decades, the photocatalytic oxidation (PCO) process has attracted attention because of its potential to purify indoor air polluted with volatile organic compounds (VOCs), especially at low concentration levels. Titanium-dioxide (TiO2)-bound building materials have been extensively studied for the oxidation of indoor VOCs. In this study, kinetic studies were carried out to evaluate the PCO of toluene in the gas phase, over TiO2-bound building materials, using a 20 l small test chamber. A Langmuir–Hinshelwood (L–H)-type model, for reproducing the PCO process over TiO2-bound building materials, was developed as a function of the toluene concentration, illumination intensity, and humidity levels. The parameters of the L–H model were determined using the hybrid identification procedure of computational fluid dynamics (CFD) simulations and a 20 l small test chamber experiment. By using this hybrid identification method, PCO kinetic parameters were estimated with reference to the concentration in viscous-sub layer. Finally, CFD simulations were also carried out under the same boundary conditions as those used in the chamber experiments to evaluate the prediction accuracy.",
author = "Koki Nakahara and Takahiro Yamaguchi and Eunsu Lim and Kazuhide Ito",
year = "2017",
month = "11",
doi = "10.1016/j.scs.2017.08.020",
language = "English",
volume = "35",
pages = "298--308",
journal = "Sustainable Cities and Society",
issn = "2210-6707",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Computational fluid dynamics modeling and parameterization of the visible light photocatalytic oxidation process of toluene for indoor building material

AU - Nakahara, Koki

AU - Yamaguchi, Takahiro

AU - Lim, Eunsu

AU - Ito, Kazuhide

PY - 2017/11

Y1 - 2017/11

N2 - Poor indoor environmental conditions caused by the presence of gas-phase/aerosol-phase contaminants are thought to be potential triggers of illnesses, leading to productivity losses. In recent decades, the photocatalytic oxidation (PCO) process has attracted attention because of its potential to purify indoor air polluted with volatile organic compounds (VOCs), especially at low concentration levels. Titanium-dioxide (TiO2)-bound building materials have been extensively studied for the oxidation of indoor VOCs. In this study, kinetic studies were carried out to evaluate the PCO of toluene in the gas phase, over TiO2-bound building materials, using a 20 l small test chamber. A Langmuir–Hinshelwood (L–H)-type model, for reproducing the PCO process over TiO2-bound building materials, was developed as a function of the toluene concentration, illumination intensity, and humidity levels. The parameters of the L–H model were determined using the hybrid identification procedure of computational fluid dynamics (CFD) simulations and a 20 l small test chamber experiment. By using this hybrid identification method, PCO kinetic parameters were estimated with reference to the concentration in viscous-sub layer. Finally, CFD simulations were also carried out under the same boundary conditions as those used in the chamber experiments to evaluate the prediction accuracy.

AB - Poor indoor environmental conditions caused by the presence of gas-phase/aerosol-phase contaminants are thought to be potential triggers of illnesses, leading to productivity losses. In recent decades, the photocatalytic oxidation (PCO) process has attracted attention because of its potential to purify indoor air polluted with volatile organic compounds (VOCs), especially at low concentration levels. Titanium-dioxide (TiO2)-bound building materials have been extensively studied for the oxidation of indoor VOCs. In this study, kinetic studies were carried out to evaluate the PCO of toluene in the gas phase, over TiO2-bound building materials, using a 20 l small test chamber. A Langmuir–Hinshelwood (L–H)-type model, for reproducing the PCO process over TiO2-bound building materials, was developed as a function of the toluene concentration, illumination intensity, and humidity levels. The parameters of the L–H model were determined using the hybrid identification procedure of computational fluid dynamics (CFD) simulations and a 20 l small test chamber experiment. By using this hybrid identification method, PCO kinetic parameters were estimated with reference to the concentration in viscous-sub layer. Finally, CFD simulations were also carried out under the same boundary conditions as those used in the chamber experiments to evaluate the prediction accuracy.

UR - http://www.scopus.com/inward/record.url?scp=85028335329&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85028335329&partnerID=8YFLogxK

U2 - 10.1016/j.scs.2017.08.020

DO - 10.1016/j.scs.2017.08.020

M3 - Article

AN - SCOPUS:85028335329

VL - 35

SP - 298

EP - 308

JO - Sustainable Cities and Society

JF - Sustainable Cities and Society

SN - 2210-6707

ER -