Concentration of a Plasma Energy Flow by a Blowing Gas

Takayuki Watanabe, Takuya Honda, Atsushi Kanzawa

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抄録

Control of energy flow density is required when a plasma flow is used for material treatment. For this purpose, hydrodynamic, magnetic or mechanical control may be used. The object of this study is to suppress the outward radial flow of the plasma flow. Sharpness of heat flux distribution to a flat plate is required in plasma cutting. Therefore, the following two experiments were carried out. One was to sharpen the enthalpy flow distribution of a thermal argon plasma jet, and the other was to sharpen the heat flux distribution to the plate. These energy flow densities of the plasma flow were raised by an inward radial blowing gas. This radial blowing gas was injected through a circumferential slit around the jet nozzle exit. Q-value, defined as the ratio of maximum energy flow to the half-value width, is adopted as an evaluation of sharpness. Not only the Q-value of enthalpy flow of the plasma but also that of heat transfer to the plate reached maximum with the radial blowing gas flow rate.

元の言語英語
ページ(範囲)1-7
ページ数7
ジャーナルkagaku kogaku ronbunshu
14
発行部数1
DOI
出版物ステータス出版済み - 1 1 1988
外部発表Yes

Fingerprint

Plasma flow
Blow molding
Gases
Plasmas
Heat flux
Enthalpy
Radial flow
Plasma jets
Argon
Flow of gases
Nozzles
Hydrodynamics
Flow rate
Heat transfer
Experiments

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)

これを引用

Concentration of a Plasma Energy Flow by a Blowing Gas. / Watanabe, Takayuki; Honda, Takuya; Kanzawa, Atsushi.

:: kagaku kogaku ronbunshu, 巻 14, 番号 1, 01.01.1988, p. 1-7.

研究成果: ジャーナルへの寄稿記事

Watanabe, Takayuki ; Honda, Takuya ; Kanzawa, Atsushi. / Concentration of a Plasma Energy Flow by a Blowing Gas. :: kagaku kogaku ronbunshu. 1988 ; 巻 14, 番号 1. pp. 1-7.
@article{fd2eed8496284ec7a67825f31f8cbe0c,
title = "Concentration of a Plasma Energy Flow by a Blowing Gas",
abstract = "Control of energy flow density is required when a plasma flow is used for material treatment. For this purpose, hydrodynamic, magnetic or mechanical control may be used. The object of this study is to suppress the outward radial flow of the plasma flow. Sharpness of heat flux distribution to a flat plate is required in plasma cutting. Therefore, the following two experiments were carried out. One was to sharpen the enthalpy flow distribution of a thermal argon plasma jet, and the other was to sharpen the heat flux distribution to the plate. These energy flow densities of the plasma flow were raised by an inward radial blowing gas. This radial blowing gas was injected through a circumferential slit around the jet nozzle exit. Q-value, defined as the ratio of maximum energy flow to the half-value width, is adopted as an evaluation of sharpness. Not only the Q-value of enthalpy flow of the plasma but also that of heat transfer to the plate reached maximum with the radial blowing gas flow rate.",
author = "Takayuki Watanabe and Takuya Honda and Atsushi Kanzawa",
year = "1988",
month = "1",
day = "1",
doi = "10.1252/kakoronbunshu.14.1",
language = "English",
volume = "14",
pages = "1--7",
journal = "Kagaku Kogaku Ronbunshu",
issn = "0386-216X",
publisher = "The Society of Chemical Engineers, Japan",
number = "1",

}

TY - JOUR

T1 - Concentration of a Plasma Energy Flow by a Blowing Gas

AU - Watanabe, Takayuki

AU - Honda, Takuya

AU - Kanzawa, Atsushi

PY - 1988/1/1

Y1 - 1988/1/1

N2 - Control of energy flow density is required when a plasma flow is used for material treatment. For this purpose, hydrodynamic, magnetic or mechanical control may be used. The object of this study is to suppress the outward radial flow of the plasma flow. Sharpness of heat flux distribution to a flat plate is required in plasma cutting. Therefore, the following two experiments were carried out. One was to sharpen the enthalpy flow distribution of a thermal argon plasma jet, and the other was to sharpen the heat flux distribution to the plate. These energy flow densities of the plasma flow were raised by an inward radial blowing gas. This radial blowing gas was injected through a circumferential slit around the jet nozzle exit. Q-value, defined as the ratio of maximum energy flow to the half-value width, is adopted as an evaluation of sharpness. Not only the Q-value of enthalpy flow of the plasma but also that of heat transfer to the plate reached maximum with the radial blowing gas flow rate.

AB - Control of energy flow density is required when a plasma flow is used for material treatment. For this purpose, hydrodynamic, magnetic or mechanical control may be used. The object of this study is to suppress the outward radial flow of the plasma flow. Sharpness of heat flux distribution to a flat plate is required in plasma cutting. Therefore, the following two experiments were carried out. One was to sharpen the enthalpy flow distribution of a thermal argon plasma jet, and the other was to sharpen the heat flux distribution to the plate. These energy flow densities of the plasma flow were raised by an inward radial blowing gas. This radial blowing gas was injected through a circumferential slit around the jet nozzle exit. Q-value, defined as the ratio of maximum energy flow to the half-value width, is adopted as an evaluation of sharpness. Not only the Q-value of enthalpy flow of the plasma but also that of heat transfer to the plate reached maximum with the radial blowing gas flow rate.

UR - http://www.scopus.com/inward/record.url?scp=8344279162&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=8344279162&partnerID=8YFLogxK

U2 - 10.1252/kakoronbunshu.14.1

DO - 10.1252/kakoronbunshu.14.1

M3 - Article

AN - SCOPUS:8344279162

VL - 14

SP - 1

EP - 7

JO - Kagaku Kogaku Ronbunshu

JF - Kagaku Kogaku Ronbunshu

SN - 0386-216X

IS - 1

ER -