Constitutive modeling of solid propellant materials with evolving microstructural damage

F. Xu, N. Aravas, Petros Athanasios Sofronis

研究成果: ジャーナルへの寄稿記事

70 引用 (Scopus)

抄録

Solid propellants are composite materials with complex microstructure. In a generic form, the material consists of polymeric binder, crystal oxidizer (e.g., ammonium perchlorate), and fuel particles (e.g., aluminum). Severe stressing and extreme temperatures induce damage which is manifested in particle cracking, dewetting along particle/polymer interfaces, void nucleation and growth. Damage complicates the overall constitutive response of a solid propellant over and above the complexities associated with the differing constitutive properties of the particle and binder phases. Using rigorous homogenization theory for composite materials, we propose a general 3-D nonlinear macroscopic constitutive law that models microstructural damage evolution upon straining through continuous void formation and growth. The law addresses the viscous deformation rate within the framework of additive decomposition of the deformation rate and the concept of back stress is used to improve the model performance in stress relaxation. No restriction is placed on the magnitude of the strains. Experimental data from the standard relaxation and uniaxial tension tests are used to calibrate the model parameters in the case of a high elongation solid propellant. It is emphasized that the model parameters are descriptors of individual phase constitutive response and criticality conditions for particle decohesion which can systematically be determined through experiment. The model is used to predict the response of the material under more complex loading paths and to investigate the effect of crack tip damage on the mechanical behavior of a compact tension fracture specimen.

元の言語英語
ページ(範囲)2050-2073
ページ数24
ジャーナルJournal of the Mechanics and Physics of Solids
56
発行部数5
DOI
出版物ステータス出版済み - 5 1 2008
外部発表Yes

Fingerprint

solid propellants
Solid propellants
damage
Binders
voids
ammonium perchlorates
composite materials
oxidizers
crack tips
stress relaxation
Composite materials
Stress relaxation
homogenizing
Crack tips
drying
elongation
Elongation
constrictions
Nucleation
nucleation

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

これを引用

Constitutive modeling of solid propellant materials with evolving microstructural damage. / Xu, F.; Aravas, N.; Sofronis, Petros Athanasios.

:: Journal of the Mechanics and Physics of Solids, 巻 56, 番号 5, 01.05.2008, p. 2050-2073.

研究成果: ジャーナルへの寄稿記事

@article{d1621bbe4ddd4026bae06ed0f52f7e13,
title = "Constitutive modeling of solid propellant materials with evolving microstructural damage",
abstract = "Solid propellants are composite materials with complex microstructure. In a generic form, the material consists of polymeric binder, crystal oxidizer (e.g., ammonium perchlorate), and fuel particles (e.g., aluminum). Severe stressing and extreme temperatures induce damage which is manifested in particle cracking, dewetting along particle/polymer interfaces, void nucleation and growth. Damage complicates the overall constitutive response of a solid propellant over and above the complexities associated with the differing constitutive properties of the particle and binder phases. Using rigorous homogenization theory for composite materials, we propose a general 3-D nonlinear macroscopic constitutive law that models microstructural damage evolution upon straining through continuous void formation and growth. The law addresses the viscous deformation rate within the framework of additive decomposition of the deformation rate and the concept of back stress is used to improve the model performance in stress relaxation. No restriction is placed on the magnitude of the strains. Experimental data from the standard relaxation and uniaxial tension tests are used to calibrate the model parameters in the case of a high elongation solid propellant. It is emphasized that the model parameters are descriptors of individual phase constitutive response and criticality conditions for particle decohesion which can systematically be determined through experiment. The model is used to predict the response of the material under more complex loading paths and to investigate the effect of crack tip damage on the mechanical behavior of a compact tension fracture specimen.",
author = "F. Xu and N. Aravas and Sofronis, {Petros Athanasios}",
year = "2008",
month = "5",
day = "1",
doi = "10.1016/j.jmps.2007.10.013",
language = "English",
volume = "56",
pages = "2050--2073",
journal = "Journal of the Mechanics and Physics of Solids",
issn = "0022-5096",
publisher = "Elsevier Limited",
number = "5",

}

TY - JOUR

T1 - Constitutive modeling of solid propellant materials with evolving microstructural damage

AU - Xu, F.

AU - Aravas, N.

AU - Sofronis, Petros Athanasios

PY - 2008/5/1

Y1 - 2008/5/1

N2 - Solid propellants are composite materials with complex microstructure. In a generic form, the material consists of polymeric binder, crystal oxidizer (e.g., ammonium perchlorate), and fuel particles (e.g., aluminum). Severe stressing and extreme temperatures induce damage which is manifested in particle cracking, dewetting along particle/polymer interfaces, void nucleation and growth. Damage complicates the overall constitutive response of a solid propellant over and above the complexities associated with the differing constitutive properties of the particle and binder phases. Using rigorous homogenization theory for composite materials, we propose a general 3-D nonlinear macroscopic constitutive law that models microstructural damage evolution upon straining through continuous void formation and growth. The law addresses the viscous deformation rate within the framework of additive decomposition of the deformation rate and the concept of back stress is used to improve the model performance in stress relaxation. No restriction is placed on the magnitude of the strains. Experimental data from the standard relaxation and uniaxial tension tests are used to calibrate the model parameters in the case of a high elongation solid propellant. It is emphasized that the model parameters are descriptors of individual phase constitutive response and criticality conditions for particle decohesion which can systematically be determined through experiment. The model is used to predict the response of the material under more complex loading paths and to investigate the effect of crack tip damage on the mechanical behavior of a compact tension fracture specimen.

AB - Solid propellants are composite materials with complex microstructure. In a generic form, the material consists of polymeric binder, crystal oxidizer (e.g., ammonium perchlorate), and fuel particles (e.g., aluminum). Severe stressing and extreme temperatures induce damage which is manifested in particle cracking, dewetting along particle/polymer interfaces, void nucleation and growth. Damage complicates the overall constitutive response of a solid propellant over and above the complexities associated with the differing constitutive properties of the particle and binder phases. Using rigorous homogenization theory for composite materials, we propose a general 3-D nonlinear macroscopic constitutive law that models microstructural damage evolution upon straining through continuous void formation and growth. The law addresses the viscous deformation rate within the framework of additive decomposition of the deformation rate and the concept of back stress is used to improve the model performance in stress relaxation. No restriction is placed on the magnitude of the strains. Experimental data from the standard relaxation and uniaxial tension tests are used to calibrate the model parameters in the case of a high elongation solid propellant. It is emphasized that the model parameters are descriptors of individual phase constitutive response and criticality conditions for particle decohesion which can systematically be determined through experiment. The model is used to predict the response of the material under more complex loading paths and to investigate the effect of crack tip damage on the mechanical behavior of a compact tension fracture specimen.

UR - http://www.scopus.com/inward/record.url?scp=41749089581&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=41749089581&partnerID=8YFLogxK

U2 - 10.1016/j.jmps.2007.10.013

DO - 10.1016/j.jmps.2007.10.013

M3 - Article

AN - SCOPUS:41749089581

VL - 56

SP - 2050

EP - 2073

JO - Journal of the Mechanics and Physics of Solids

JF - Journal of the Mechanics and Physics of Solids

SN - 0022-5096

IS - 5

ER -