Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy

Motomichi Koyama, Takahiro Sawaguchi, Kazuyuki Ogawa, Takehiko Kikuchi, Masato Murakami

研究成果: Contribution to journalArticle

3 引用 (Scopus)


Deformation modes at various stages of plastic deformation have been investigated at identical locations in an Fe-30Mn-5Si-1A1 (mass%) alloy specimen, which exhibits a good shape memory effect associated with FCC (7) →HCP (ε) martensitic transformation and relatively high ductility caused by deformation twinning. The surface relief caused by γ→ε martensitic transformation, deformation twinning and slip band formation has been analyzed by measuring surface tilt angles corresponding to each deformation mode by atomic force microscopy. Although ε-martensitic transformation is the dominant deformation mode in the early deformation stage, a part of the E-martensite plates changes to deformation twins with the increase of deformation volume. Slip deformation also occurs inside the same region under excessive strain. The continuous transition of these deformation modes also occurs in the other grains in the same order: ε martensite→deformation twins→slip bands.

ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
出版物ステータス出版済み - 3 1 2009

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント Continuous transition of deformation mode in Fe-30Mn-5Si-lAl alloy' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用