Cooling performance of hybrid refrigerant of solid nitrogen and small amount of neon for the purpose of HTS power applications

Kohei Higashikawa, T. Nakamura

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

抄録

We have investigated cooling performance of a hybrid refrigerant of solid nitrogen and small amount of neon by using a short sample of Bi-2223/Ag tape as a cooling target. Solid nitrogen is expected as a heat capacitor for HTS applications operated below triple point temperature of nitrogen, and we have proposed in our previous study a method for overcoming the problem of its thermal contact with a cooling target with the aid of small amount of liquid neon. This paper discusses the phase state as well as the quantity of neon required for such an improvement. Nitrogen gas was introduced into a sample chamber through a mass flow controller, and then was liquefied and solidified by a Gifford-McMahon cryocooler. After that, in order to improve thermal contact of the solid nitrogen with the sample, neon gas was also introduced into the chamber at 25 K where neon can be liquefied. Cooling performance of such a hybrid refrigerant with different inputs of neon was evaluated by measuring temperature rise of the sample with the transportation of overcurrent. As a result, neon could suppress the temperature rise even in gas state, and the existence of liquid neon could additionally suppress the temperature rise. Furthermore, the required proportion of the liquid neon to the solid nitrogen was very small. From these results, we concluded that introducing neon until neon can be liquefied was the best way to make the most of the potential of the hybrid refrigerant.

元の言語英語
ページ(範囲)1910-1914
ページ数5
ジャーナルPhysica C: Superconductivity and its applications
469
発行部数21
DOI
出版物ステータス出版済み - 11 1 2009

Fingerprint

Neon
solid nitrogen
refrigerants
Refrigerants
neon
Nitrogen
Cooling
cooling
liquid neon
electric contacts
Gases
chambers
gases
nitrogen
Liquids
temperature
mass flow
tapes
Temperature
controllers

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology
  • Electronic, Optical and Magnetic Materials

これを引用

@article{c9a023fedfb1409cac4ca48eeee54992,
title = "Cooling performance of hybrid refrigerant of solid nitrogen and small amount of neon for the purpose of HTS power applications",
abstract = "We have investigated cooling performance of a hybrid refrigerant of solid nitrogen and small amount of neon by using a short sample of Bi-2223/Ag tape as a cooling target. Solid nitrogen is expected as a heat capacitor for HTS applications operated below triple point temperature of nitrogen, and we have proposed in our previous study a method for overcoming the problem of its thermal contact with a cooling target with the aid of small amount of liquid neon. This paper discusses the phase state as well as the quantity of neon required for such an improvement. Nitrogen gas was introduced into a sample chamber through a mass flow controller, and then was liquefied and solidified by a Gifford-McMahon cryocooler. After that, in order to improve thermal contact of the solid nitrogen with the sample, neon gas was also introduced into the chamber at 25 K where neon can be liquefied. Cooling performance of such a hybrid refrigerant with different inputs of neon was evaluated by measuring temperature rise of the sample with the transportation of overcurrent. As a result, neon could suppress the temperature rise even in gas state, and the existence of liquid neon could additionally suppress the temperature rise. Furthermore, the required proportion of the liquid neon to the solid nitrogen was very small. From these results, we concluded that introducing neon until neon can be liquefied was the best way to make the most of the potential of the hybrid refrigerant.",
author = "Kohei Higashikawa and T. Nakamura",
year = "2009",
month = "11",
day = "1",
doi = "10.1016/j.physc.2009.06.007",
language = "English",
volume = "469",
pages = "1910--1914",
journal = "Physica C: Superconductivity and its Applications",
issn = "0921-4534",
publisher = "Elsevier",
number = "21",

}

TY - JOUR

T1 - Cooling performance of hybrid refrigerant of solid nitrogen and small amount of neon for the purpose of HTS power applications

AU - Higashikawa, Kohei

AU - Nakamura, T.

PY - 2009/11/1

Y1 - 2009/11/1

N2 - We have investigated cooling performance of a hybrid refrigerant of solid nitrogen and small amount of neon by using a short sample of Bi-2223/Ag tape as a cooling target. Solid nitrogen is expected as a heat capacitor for HTS applications operated below triple point temperature of nitrogen, and we have proposed in our previous study a method for overcoming the problem of its thermal contact with a cooling target with the aid of small amount of liquid neon. This paper discusses the phase state as well as the quantity of neon required for such an improvement. Nitrogen gas was introduced into a sample chamber through a mass flow controller, and then was liquefied and solidified by a Gifford-McMahon cryocooler. After that, in order to improve thermal contact of the solid nitrogen with the sample, neon gas was also introduced into the chamber at 25 K where neon can be liquefied. Cooling performance of such a hybrid refrigerant with different inputs of neon was evaluated by measuring temperature rise of the sample with the transportation of overcurrent. As a result, neon could suppress the temperature rise even in gas state, and the existence of liquid neon could additionally suppress the temperature rise. Furthermore, the required proportion of the liquid neon to the solid nitrogen was very small. From these results, we concluded that introducing neon until neon can be liquefied was the best way to make the most of the potential of the hybrid refrigerant.

AB - We have investigated cooling performance of a hybrid refrigerant of solid nitrogen and small amount of neon by using a short sample of Bi-2223/Ag tape as a cooling target. Solid nitrogen is expected as a heat capacitor for HTS applications operated below triple point temperature of nitrogen, and we have proposed in our previous study a method for overcoming the problem of its thermal contact with a cooling target with the aid of small amount of liquid neon. This paper discusses the phase state as well as the quantity of neon required for such an improvement. Nitrogen gas was introduced into a sample chamber through a mass flow controller, and then was liquefied and solidified by a Gifford-McMahon cryocooler. After that, in order to improve thermal contact of the solid nitrogen with the sample, neon gas was also introduced into the chamber at 25 K where neon can be liquefied. Cooling performance of such a hybrid refrigerant with different inputs of neon was evaluated by measuring temperature rise of the sample with the transportation of overcurrent. As a result, neon could suppress the temperature rise even in gas state, and the existence of liquid neon could additionally suppress the temperature rise. Furthermore, the required proportion of the liquid neon to the solid nitrogen was very small. From these results, we concluded that introducing neon until neon can be liquefied was the best way to make the most of the potential of the hybrid refrigerant.

UR - http://www.scopus.com/inward/record.url?scp=69649094296&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=69649094296&partnerID=8YFLogxK

U2 - 10.1016/j.physc.2009.06.007

DO - 10.1016/j.physc.2009.06.007

M3 - Article

VL - 469

SP - 1910

EP - 1914

JO - Physica C: Superconductivity and its Applications

JF - Physica C: Superconductivity and its Applications

SN - 0921-4534

IS - 21

ER -