Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements

研究成果: 著書/レポートタイプへの貢献会議での発言

4 引用 (Scopus)

抄録

Current distribution of a practical solid oxide fuel cell (SOFC) has been analyzed from a thermal analysis combined with surface temperature measurements. Electrochemical impedance spectroscopy with two-electrode set-up is employed on an anode-supported microtubular SOFC. This cell is an intermediate temperature SOFC composed of Ni/(ZrO 2) 0.9(Y 2O 3) 0.1 cermet anode, La 0.8Sr 0.2Ga 0.8Mg 0.2O 2.8 electrolyte, and (La 0.6SrO 4)(Co 0.2Fe 0.8)O 3 cathode. The impedance spectra give the resistances at the anode and cathode and the cell ohmic resistance. By numerically integrating these resistances, overpotentials are evaluated. The overpotentials and the single electrode (electrochemical) Peltier heats at the anode and cathode provide individual heat production rates. Since the energy balance equations incorporating these heat production rates determined by current yield the surface temperatures of the cell, local current densities are obtained so that the calculated and measured temperatures by thermocouples at several positions in the anode and cathode surfaces coincide.

元の言語英語
ホスト出版物のタイトルSolid Oxide Fuel Cells 12, SOFC XII
ページ1087-1096
ページ数10
エディション2 PART 2
DOI
出版物ステータス出版済み - 12 1 2011
イベント12th International Symposium on Solid Oxide Fuel Cells, SOFC-XII - 219th ECS Meeting - Montreal, QC, カナダ
継続期間: 5 1 20115 6 2011

出版物シリーズ

名前ECS Transactions
番号2 PART 2
35
ISSN(印刷物)1938-5862
ISSN(電子版)1938-6737

その他

その他12th International Symposium on Solid Oxide Fuel Cells, SOFC-XII - 219th ECS Meeting
カナダ
Montreal, QC
期間5/1/115/6/11

Fingerprint

Surface measurement
Solid oxide fuel cells (SOFC)
Temperature measurement
Anodes
Cathodes
Electrochemical electrodes
Acoustic impedance
Thermocouples
Energy balance
Electrochemical impedance spectroscopy
Temperature
Thermoanalysis
Current density
Electrolytes
Electrodes
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Nakajima, H., & Kitahara, T. (2011). Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements. : Solid Oxide Fuel Cells 12, SOFC XII (2 PART 2 版, pp. 1087-1096). (ECS Transactions; 巻数 35, 番号 2 PART 2). https://doi.org/10.1149/1.3570089

Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements. / Nakajima, Hironori; Kitahara, Tatsumi.

Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2. 編 2011. p. 1087-1096 (ECS Transactions; 巻 35, 番号 2 PART 2).

研究成果: 著書/レポートタイプへの貢献会議での発言

Nakajima, H & Kitahara, T 2011, Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements. : Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2 Edn, ECS Transactions, 番号 2 PART 2, 巻. 35, pp. 1087-1096, 12th International Symposium on Solid Oxide Fuel Cells, SOFC-XII - 219th ECS Meeting, Montreal, QC, カナダ, 5/1/11. https://doi.org/10.1149/1.3570089
Nakajima H, Kitahara T. Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements. : Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2 版 2011. p. 1087-1096. (ECS Transactions; 2 PART 2). https://doi.org/10.1149/1.3570089
Nakajima, Hironori ; Kitahara, Tatsumi. / Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements. Solid Oxide Fuel Cells 12, SOFC XII. 2 PART 2. 版 2011. pp. 1087-1096 (ECS Transactions; 2 PART 2).
@inproceedings{bc687ae742424b5fb686f8c9bea3812e,
title = "Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements",
abstract = "Current distribution of a practical solid oxide fuel cell (SOFC) has been analyzed from a thermal analysis combined with surface temperature measurements. Electrochemical impedance spectroscopy with two-electrode set-up is employed on an anode-supported microtubular SOFC. This cell is an intermediate temperature SOFC composed of Ni/(ZrO 2) 0.9(Y 2O 3) 0.1 cermet anode, La 0.8Sr 0.2Ga 0.8Mg 0.2O 2.8 electrolyte, and (La 0.6SrO 4)(Co 0.2Fe 0.8)O 3 cathode. The impedance spectra give the resistances at the anode and cathode and the cell ohmic resistance. By numerically integrating these resistances, overpotentials are evaluated. The overpotentials and the single electrode (electrochemical) Peltier heats at the anode and cathode provide individual heat production rates. Since the energy balance equations incorporating these heat production rates determined by current yield the surface temperatures of the cell, local current densities are obtained so that the calculated and measured temperatures by thermocouples at several positions in the anode and cathode surfaces coincide.",
author = "Hironori Nakajima and Tatsumi Kitahara",
year = "2011",
month = "12",
day = "1",
doi = "10.1149/1.3570089",
language = "English",
isbn = "9781607682363",
series = "ECS Transactions",
number = "2 PART 2",
pages = "1087--1096",
booktitle = "Solid Oxide Fuel Cells 12, SOFC XII",
edition = "2 PART 2",

}

TY - GEN

T1 - Current distribution analysis of a microtubular solid oxide fuel cell with surface temperature measurements

AU - Nakajima, Hironori

AU - Kitahara, Tatsumi

PY - 2011/12/1

Y1 - 2011/12/1

N2 - Current distribution of a practical solid oxide fuel cell (SOFC) has been analyzed from a thermal analysis combined with surface temperature measurements. Electrochemical impedance spectroscopy with two-electrode set-up is employed on an anode-supported microtubular SOFC. This cell is an intermediate temperature SOFC composed of Ni/(ZrO 2) 0.9(Y 2O 3) 0.1 cermet anode, La 0.8Sr 0.2Ga 0.8Mg 0.2O 2.8 electrolyte, and (La 0.6SrO 4)(Co 0.2Fe 0.8)O 3 cathode. The impedance spectra give the resistances at the anode and cathode and the cell ohmic resistance. By numerically integrating these resistances, overpotentials are evaluated. The overpotentials and the single electrode (electrochemical) Peltier heats at the anode and cathode provide individual heat production rates. Since the energy balance equations incorporating these heat production rates determined by current yield the surface temperatures of the cell, local current densities are obtained so that the calculated and measured temperatures by thermocouples at several positions in the anode and cathode surfaces coincide.

AB - Current distribution of a practical solid oxide fuel cell (SOFC) has been analyzed from a thermal analysis combined with surface temperature measurements. Electrochemical impedance spectroscopy with two-electrode set-up is employed on an anode-supported microtubular SOFC. This cell is an intermediate temperature SOFC composed of Ni/(ZrO 2) 0.9(Y 2O 3) 0.1 cermet anode, La 0.8Sr 0.2Ga 0.8Mg 0.2O 2.8 electrolyte, and (La 0.6SrO 4)(Co 0.2Fe 0.8)O 3 cathode. The impedance spectra give the resistances at the anode and cathode and the cell ohmic resistance. By numerically integrating these resistances, overpotentials are evaluated. The overpotentials and the single electrode (electrochemical) Peltier heats at the anode and cathode provide individual heat production rates. Since the energy balance equations incorporating these heat production rates determined by current yield the surface temperatures of the cell, local current densities are obtained so that the calculated and measured temperatures by thermocouples at several positions in the anode and cathode surfaces coincide.

UR - http://www.scopus.com/inward/record.url?scp=84856942288&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84856942288&partnerID=8YFLogxK

U2 - 10.1149/1.3570089

DO - 10.1149/1.3570089

M3 - Conference contribution

AN - SCOPUS:84856942288

SN - 9781607682363

T3 - ECS Transactions

SP - 1087

EP - 1096

BT - Solid Oxide Fuel Cells 12, SOFC XII

ER -