Current limiting phenomena in SmBa2Cu3O7 coated conductors observed by laser-induced thermoelectric imaging and low-temperature laser scanning microscopy

G. Kim, W. Jo, A. Matsekh, Masayoshi Inoue, Takanobu Kiss, H. S. Ha, S. S. Oh

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

SmBa2Cu3O7 (SmBCO) coated conductors were grown on IBAD-MgO templates the evaporation using a drum-in-dual-chambers (EDDC) deposition system. The material showed a critical temperature of 93 ̃ 94 K and a critical current of 200 ̃ 250 A/cm-width at 77 K in a self-field. The current-limiting properties and local structure of the films were examined by laser-induced thermoelectric (LITE) imaging and lowtemperature laser scanning microscopy (LTLSM). Surface morphology and chemical composition of the superconducting layers were examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. A 100μm × 1mm-microbridgewas fabricated using a photolithographic technique and etching process. The measured LITE images of the SmBCO coated conductor showed that some grains on the surface, surface inhomogeneity, second phases, defects and tilted grains, cause different thermal gradients. The LTLSM images revealed twodimensional variations of local flux flow on the films as a function of the local critical current. The findings are consistent with the LITE images, indicating that both methods can visualize the local structures and phases.

元の言語英語
記事番号5635355
ページ(範囲)3421-3424
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
21
発行部数3 PART 3
DOI
出版物ステータス出版済み - 6 1 2011

Fingerprint

Microscopic examination
conductors
microscopy
Scanning
Imaging techniques
scanning
Lasers
Critical currents
lasers
critical current
Temperature
Ion beam assisted deposition
drums
Thermal gradients
Surface morphology
Energy dispersive spectroscopy
Etching
critical temperature
chemical composition
Evaporation

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

これを引用

Current limiting phenomena in SmBa2Cu3O7 coated conductors observed by laser-induced thermoelectric imaging and low-temperature laser scanning microscopy. / Kim, G.; Jo, W.; Matsekh, A.; Inoue, Masayoshi; Kiss, Takanobu; Ha, H. S.; Oh, S. S.

:: IEEE Transactions on Applied Superconductivity, 巻 21, 番号 3 PART 3, 5635355, 01.06.2011, p. 3421-3424.

研究成果: ジャーナルへの寄稿記事

@article{2d32d3cf71fb4c0a963ee595927dda52,
title = "Current limiting phenomena in SmBa2Cu3O7 coated conductors observed by laser-induced thermoelectric imaging and low-temperature laser scanning microscopy",
abstract = "SmBa2Cu3O7 (SmBCO) coated conductors were grown on IBAD-MgO templates the evaporation using a drum-in-dual-chambers (EDDC) deposition system. The material showed a critical temperature of 93 ̃ 94 K and a critical current of 200 ̃ 250 A/cm-width at 77 K in a self-field. The current-limiting properties and local structure of the films were examined by laser-induced thermoelectric (LITE) imaging and lowtemperature laser scanning microscopy (LTLSM). Surface morphology and chemical composition of the superconducting layers were examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. A 100μm × 1mm-microbridgewas fabricated using a photolithographic technique and etching process. The measured LITE images of the SmBCO coated conductor showed that some grains on the surface, surface inhomogeneity, second phases, defects and tilted grains, cause different thermal gradients. The LTLSM images revealed twodimensional variations of local flux flow on the films as a function of the local critical current. The findings are consistent with the LITE images, indicating that both methods can visualize the local structures and phases.",
author = "G. Kim and W. Jo and A. Matsekh and Masayoshi Inoue and Takanobu Kiss and Ha, {H. S.} and Oh, {S. S.}",
year = "2011",
month = "6",
day = "1",
doi = "10.1109/TASC.2010.2086040",
language = "English",
volume = "21",
pages = "3421--3424",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3 PART 3",

}

TY - JOUR

T1 - Current limiting phenomena in SmBa2Cu3O7 coated conductors observed by laser-induced thermoelectric imaging and low-temperature laser scanning microscopy

AU - Kim, G.

AU - Jo, W.

AU - Matsekh, A.

AU - Inoue, Masayoshi

AU - Kiss, Takanobu

AU - Ha, H. S.

AU - Oh, S. S.

PY - 2011/6/1

Y1 - 2011/6/1

N2 - SmBa2Cu3O7 (SmBCO) coated conductors were grown on IBAD-MgO templates the evaporation using a drum-in-dual-chambers (EDDC) deposition system. The material showed a critical temperature of 93 ̃ 94 K and a critical current of 200 ̃ 250 A/cm-width at 77 K in a self-field. The current-limiting properties and local structure of the films were examined by laser-induced thermoelectric (LITE) imaging and lowtemperature laser scanning microscopy (LTLSM). Surface morphology and chemical composition of the superconducting layers were examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. A 100μm × 1mm-microbridgewas fabricated using a photolithographic technique and etching process. The measured LITE images of the SmBCO coated conductor showed that some grains on the surface, surface inhomogeneity, second phases, defects and tilted grains, cause different thermal gradients. The LTLSM images revealed twodimensional variations of local flux flow on the films as a function of the local critical current. The findings are consistent with the LITE images, indicating that both methods can visualize the local structures and phases.

AB - SmBa2Cu3O7 (SmBCO) coated conductors were grown on IBAD-MgO templates the evaporation using a drum-in-dual-chambers (EDDC) deposition system. The material showed a critical temperature of 93 ̃ 94 K and a critical current of 200 ̃ 250 A/cm-width at 77 K in a self-field. The current-limiting properties and local structure of the films were examined by laser-induced thermoelectric (LITE) imaging and lowtemperature laser scanning microscopy (LTLSM). Surface morphology and chemical composition of the superconducting layers were examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. A 100μm × 1mm-microbridgewas fabricated using a photolithographic technique and etching process. The measured LITE images of the SmBCO coated conductor showed that some grains on the surface, surface inhomogeneity, second phases, defects and tilted grains, cause different thermal gradients. The LTLSM images revealed twodimensional variations of local flux flow on the films as a function of the local critical current. The findings are consistent with the LITE images, indicating that both methods can visualize the local structures and phases.

UR - http://www.scopus.com/inward/record.url?scp=79957938360&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79957938360&partnerID=8YFLogxK

U2 - 10.1109/TASC.2010.2086040

DO - 10.1109/TASC.2010.2086040

M3 - Article

AN - SCOPUS:79957938360

VL - 21

SP - 3421

EP - 3424

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 3 PART 3

M1 - 5635355

ER -