Current status and prospect of plasma control system for steady-state operation on QUEST

Makoto Hasegawa, Kazuo Nakamura, Hideki Zushi, Kazuaki Hanada, Akihide Fujisawa, Kazutoshi Tokunaga, Hiroshi Idei, Yoshihiko Nagashima, Shoji Kawasaki, Hisatoshi Nakashima, Aki Higashijima

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

元の言語英語
ページ(範囲)699-702
ページ数4
ジャーナルFusion Engineering and Design
112
DOI
出版物ステータス出版済み - 11 15 2016

Fingerprint

Plasmas
Control systems
Fueling
Low pass filters
Digital filters
Gases
Vacuum
Fluxes
Data storage equipment
Monitoring
Sensors
Processing
Temperature

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

これを引用

Current status and prospect of plasma control system for steady-state operation on QUEST. / Hasegawa, Makoto; Nakamura, Kazuo; Zushi, Hideki; Hanada, Kazuaki; Fujisawa, Akihide; Tokunaga, Kazutoshi; Idei, Hiroshi; Nagashima, Yoshihiko; Kawasaki, Shoji; Nakashima, Hisatoshi; Higashijima, Aki.

:: Fusion Engineering and Design, 巻 112, 15.11.2016, p. 699-702.

研究成果: ジャーナルへの寄稿記事

@article{362d0d1951bf4d2f9afc91aa47e781ca,
title = "Current status and prospect of plasma control system for steady-state operation on QUEST",
abstract = "The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.",
author = "Makoto Hasegawa and Kazuo Nakamura and Hideki Zushi and Kazuaki Hanada and Akihide Fujisawa and Kazutoshi Tokunaga and Hiroshi Idei and Yoshihiko Nagashima and Shoji Kawasaki and Hisatoshi Nakashima and Aki Higashijima",
year = "2016",
month = "11",
day = "15",
doi = "10.1016/j.fusengdes.2016.04.016",
language = "English",
volume = "112",
pages = "699--702",
journal = "Fusion Engineering and Design",
issn = "0920-3796",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Current status and prospect of plasma control system for steady-state operation on QUEST

AU - Hasegawa, Makoto

AU - Nakamura, Kazuo

AU - Zushi, Hideki

AU - Hanada, Kazuaki

AU - Fujisawa, Akihide

AU - Tokunaga, Kazutoshi

AU - Idei, Hiroshi

AU - Nagashima, Yoshihiko

AU - Kawasaki, Shoji

AU - Nakashima, Hisatoshi

AU - Higashijima, Aki

PY - 2016/11/15

Y1 - 2016/11/15

N2 - The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

AB - The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

UR - http://www.scopus.com/inward/record.url?scp=84963650342&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84963650342&partnerID=8YFLogxK

U2 - 10.1016/j.fusengdes.2016.04.016

DO - 10.1016/j.fusengdes.2016.04.016

M3 - Article

AN - SCOPUS:84963650342

VL - 112

SP - 699

EP - 702

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

SN - 0920-3796

ER -