Damage monitoring of ceramic grinding tool using amplitude modulation of vibration

Takumi Inoue, Toshiro Emura, Takahiro Nakano

研究成果: Contribution to journalArticle査読

抄録

One of the problems in ceramic grinding is damage to tool after a long time operation. It gives a crucial damage to work piece so that the grinding tool has to be replaced by new tool before the crucial damage. Acoustic emission is often used in the monitoring. It gives satisfactory results in certain case, while some results are ineffective because the acoustic emission is sensitive to noise. In the present study, we use the vibration acceleration of the ceramic work piece during the grinding process. The acceleration can be easily acquired and show stable characteristics irrespective of measurement location. We investigate a feasibility of damage monitoring of ceramic grinding tool using the vibration acceleration, and focus on the amplitude modulation of the obtained acceleration. A direct frequency analysis to the obtained acceleration is ineffective for the monitoring because it only shows broadband random frequency components. On one hand, the frequency analysis of the amplitude modulation shows significant results. The rotational frequency of the tool and its multiples are clearly observed in the frequency components of the amplitude modulation, and the tool condition can be monitored by tracking the transition of the rotational and its multiples frequency components.

本文言語英語
ページ(範囲)970-981
ページ数12
ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
79
800
DOI
出版ステータス出版済み - 2013

All Science Journal Classification (ASJC) codes

  • 材料力学
  • 機械工学
  • 産業および生産工学

フィンガープリント

「Damage monitoring of ceramic grinding tool using amplitude modulation of vibration」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル