Defect formation in austenitic stainless steels during shutdown procedure of FFTF

H. Watanabe, T. Muroga, N. Yoshida

研究成果: Contribution to journalArticle査読

12 被引用数 (Scopus)

抄録

Defect formation during a shutdown procedure of a fast reactor has been investigated. A Fe-16Cr-17Ni alloy and two phosphorus-containing alloys, Fe-16Cr-17Ni-0.024P and Fe-16Cr-17Ni-0.1P, were irradiated in the Fast Flux Test Facility (FFTF) using Materials Open Test Assembly (MOTA) during Cycle 10 and Cycle 11. In the case of Cycle 10, in which the reactor was shut down by a controlled procedure, interstitial-type dislocation loops were formed in addition to voids. In the case of Cycle 11, in which the reactor scrammed, stacking fault tetrahedra (SFT) were formed in addition to the voids. Standing on the rate theory of defect processes under irradiation, it was predicted that the interstitial loops were nucleated by the short neutron exposure during a shutdown process, but the SFT were formed as agglomerates of vacancies and their small clusters which were accumulated in the matrix as a result of balance of interstitials and vacancies under irradiation.

本文言語英語
ページ(範囲)178-186
ページ数9
ジャーナルJournal of Nuclear Materials
217
1-2
DOI
出版ステータス出版済み - 11 1994

All Science Journal Classification (ASJC) codes

  • 核物理学および高エネルギー物理学
  • 材料科学(全般)
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Defect formation in austenitic stainless steels during shutdown procedure of FFTF」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル