Deformation and solidification of a droplet on a cold substrate

Takayuki Watanabe, I. Kuribayashi, T. Honda, A. Kanzawa

研究成果: ジャーナルへの寄稿記事

82 引用 (Scopus)

抜粋

The numerical simulation of a droplet deformation and solidification on a cold substrate was performed with SMAC algorithm. The substrate temperature histories and the degree of deformation were measured by use of a droplet of n-eicosane and n-cetane. The numerical results showed good agreement with the measured ones. The solidification of a droplet on a substrate occurs immediately after the deformation. A simple model to estimate the deformation and the solidification time was also proposed. Both the normalized deformation and solidification time are proportional to the 0.2 power of the Reynolds number. The solidification time is two orders of magnitude higher than the deformation time.

元の言語英語
ページ(範囲)3059-3065
ページ数7
ジャーナルChemical Engineering Science
47
発行部数12
DOI
出版物ステータス出版済み - 1 1 1992
外部発表Yes

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)

これを引用