Deformation microstructure and fracture behavior in creep-exposed Alloy 617

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抄録

The causes of the change in creep rupture ductility with the creep test temperature in Alloy 617 were investigated. The rupture ductility in the creep test was low at 700°C, whereas it was high at 800°C. Although the rupture ductility depended on the creep test temperature, creep fracture occurred due to cavity formation at the grain boundaries under all the creep conditions. In the sample crept at 800°C, subgrains developed with creep deformation. However, the crept sample at 700°C fractured before the subgrain formation. Although the work hardening due to the creep deformation occurred at 700°C, the work hardening in the sample crept at 800°C was small. The deformation of the grains was suppressed by the work hardening and by γ particle dispersion strengthening at 700°C. The difference in the strength in the crystal grains that resulted from the microstructure formed during creep caused the difference in the growth of the cavities.

元の言語英語
ページ(範囲)442-449
ページ数8
ジャーナルMaterials Transactions
58
発行部数3
DOI
出版物ステータス出版済み - 1 1 2017

Fingerprint

creep tests
work hardening
ductility
Creep
microstructure
Microstructure
dispersion strengthening
cavities
grain boundaries
Strain hardening
Ductility
temperature
causes
crystals
Strengthening (metal)
Grain boundaries

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

これを引用

@article{c9394592037e4d099fdf084e77803c61,
title = "Deformation microstructure and fracture behavior in creep-exposed Alloy 617",
abstract = "The causes of the change in creep rupture ductility with the creep test temperature in Alloy 617 were investigated. The rupture ductility in the creep test was low at 700°C, whereas it was high at 800°C. Although the rupture ductility depended on the creep test temperature, creep fracture occurred due to cavity formation at the grain boundaries under all the creep conditions. In the sample crept at 800°C, subgrains developed with creep deformation. However, the crept sample at 700°C fractured before the subgrain formation. Although the work hardening due to the creep deformation occurred at 700°C, the work hardening in the sample crept at 800°C was small. The deformation of the grains was suppressed by the work hardening and by γ particle dispersion strengthening at 700°C. The difference in the strength in the crystal grains that resulted from the microstructure formed during creep caused the difference in the growth of the cavities.",
author = "Shigeto Yamasaki and Masatoshi Mitsuhara and Hideharu Nakashima",
year = "2017",
month = "1",
day = "1",
doi = "10.2320/matertrans.M2016407",
language = "English",
volume = "58",
pages = "442--449",
journal = "Materials Transactions",
issn = "0916-1821",
publisher = "The Japan Institute of Metals and Materials",
number = "3",

}

TY - JOUR

T1 - Deformation microstructure and fracture behavior in creep-exposed Alloy 617

AU - Yamasaki, Shigeto

AU - Mitsuhara, Masatoshi

AU - Nakashima, Hideharu

PY - 2017/1/1

Y1 - 2017/1/1

N2 - The causes of the change in creep rupture ductility with the creep test temperature in Alloy 617 were investigated. The rupture ductility in the creep test was low at 700°C, whereas it was high at 800°C. Although the rupture ductility depended on the creep test temperature, creep fracture occurred due to cavity formation at the grain boundaries under all the creep conditions. In the sample crept at 800°C, subgrains developed with creep deformation. However, the crept sample at 700°C fractured before the subgrain formation. Although the work hardening due to the creep deformation occurred at 700°C, the work hardening in the sample crept at 800°C was small. The deformation of the grains was suppressed by the work hardening and by γ particle dispersion strengthening at 700°C. The difference in the strength in the crystal grains that resulted from the microstructure formed during creep caused the difference in the growth of the cavities.

AB - The causes of the change in creep rupture ductility with the creep test temperature in Alloy 617 were investigated. The rupture ductility in the creep test was low at 700°C, whereas it was high at 800°C. Although the rupture ductility depended on the creep test temperature, creep fracture occurred due to cavity formation at the grain boundaries under all the creep conditions. In the sample crept at 800°C, subgrains developed with creep deformation. However, the crept sample at 700°C fractured before the subgrain formation. Although the work hardening due to the creep deformation occurred at 700°C, the work hardening in the sample crept at 800°C was small. The deformation of the grains was suppressed by the work hardening and by γ particle dispersion strengthening at 700°C. The difference in the strength in the crystal grains that resulted from the microstructure formed during creep caused the difference in the growth of the cavities.

UR - http://www.scopus.com/inward/record.url?scp=85016074082&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85016074082&partnerID=8YFLogxK

U2 - 10.2320/matertrans.M2016407

DO - 10.2320/matertrans.M2016407

M3 - Article

AN - SCOPUS:85016074082

VL - 58

SP - 442

EP - 449

JO - Materials Transactions

JF - Materials Transactions

SN - 0916-1821

IS - 3

ER -