Delamination detection in holed CFRP laminates using visualized ultrasound propagation

Shigeki Yashiro, Junji Takatsubo, Nobuyuki Toyama, Tomonaga Okabe, Nobuo Takeda

研究成果: Contribution to journalArticle

7 引用 (Scopus)

抜粋

This study applied a newly developed technique for visualizing ultrasonic waves to damage detection in holed CFRP laminates. This technique provided a moving diagram of propagating waves with the use of a pulsed laser for generation scanning a specimen and a fixed transducer for reception. Multiple types of damage (i.e. splits, transverse cracks and delamination), as well as delamination during processing, were observed near the hole in the loaded specimens by soft X-ray radiography. The specimens were then inspected by visualizing the propagation of ultrasonic waves. The S0 and A 0 Lamb modes were visualized on the CFRP cross-ply laminate. Furthermore, we successfully detected delamination near the hole through the appearance of scattered waves. These inspection results agreed well with that by soft X-ray radiography, and consequently confirmed the usefulness of the technique for visualizing ultrasonic waves in inspection for composite laminates.

元の言語英語
ページ(範囲)1882-1887
ページ数6
ジャーナルNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
72
発行部数12
DOI
出版物ステータス出版済み - 12 2006
外部発表Yes

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Delamination detection in holed CFRP laminates using visualized ultrasound propagation' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用