Deriving the storage function model parameters by using runoff data only

Joko Sujono, Shiomi Shikasho, Kazuaki Hiramatsu

研究成果: ジャーナルへの寄稿記事

抄録

Rainfall-runoff models require rainfall and runoff data for determining the model parameters. Problem usually emerges in finding the optimal model parameters due to lack of rainfall data in terms of quantity and quality. In a lumped model such as the storage function model, good quality and quantity of input (rainfall) data that represent the catchment behavior is needed in order to get the optimum model parameters. However, it is difficult to get the rainfall data that fulfill the requirement as results of high spatial variability of rainfall data and lack of automatic rainfall recorder that are commonly found in tropical regions. To overcome the above problem, the filter separation autoregressive model might be used to estimate the rainfall time series based on runoff data only. The resulted rainfall together with the runoff data are then used to find the storage function model parameters. The results show that the inversely estimated rainfall was useful for estimating the rainfall-runoff model parameters in topical regions.

元の言語英語
ページ(範囲)129-138
ページ数10
ジャーナルJournal of the Faculty of Agriculture, Kyushu University
47
発行部数1
出版物ステータス出版済み - 10 2002

Fingerprint

runoff
rain
meteorological data
hydrologic models
time series analysis
tropics

All Science Journal Classification (ASJC) codes

  • Agricultural and Biological Sciences (miscellaneous)

これを引用

Deriving the storage function model parameters by using runoff data only. / Sujono, Joko; Shikasho, Shiomi; Hiramatsu, Kazuaki.

:: Journal of the Faculty of Agriculture, Kyushu University, 巻 47, 番号 1, 10.2002, p. 129-138.

研究成果: ジャーナルへの寄稿記事

@article{a5dfe6cd7b504ef4965ceb31b27920f8,
title = "Deriving the storage function model parameters by using runoff data only",
abstract = "Rainfall-runoff models require rainfall and runoff data for determining the model parameters. Problem usually emerges in finding the optimal model parameters due to lack of rainfall data in terms of quantity and quality. In a lumped model such as the storage function model, good quality and quantity of input (rainfall) data that represent the catchment behavior is needed in order to get the optimum model parameters. However, it is difficult to get the rainfall data that fulfill the requirement as results of high spatial variability of rainfall data and lack of automatic rainfall recorder that are commonly found in tropical regions. To overcome the above problem, the filter separation autoregressive model might be used to estimate the rainfall time series based on runoff data only. The resulted rainfall together with the runoff data are then used to find the storage function model parameters. The results show that the inversely estimated rainfall was useful for estimating the rainfall-runoff model parameters in topical regions.",
author = "Joko Sujono and Shiomi Shikasho and Kazuaki Hiramatsu",
year = "2002",
month = "10",
language = "English",
volume = "47",
pages = "129--138",
journal = "Journal of the Faculty of Agriculture, Kyushu University",
issn = "0023-6152",
publisher = "Faculty of Agriculture, Kyushu University",
number = "1",

}

TY - JOUR

T1 - Deriving the storage function model parameters by using runoff data only

AU - Sujono, Joko

AU - Shikasho, Shiomi

AU - Hiramatsu, Kazuaki

PY - 2002/10

Y1 - 2002/10

N2 - Rainfall-runoff models require rainfall and runoff data for determining the model parameters. Problem usually emerges in finding the optimal model parameters due to lack of rainfall data in terms of quantity and quality. In a lumped model such as the storage function model, good quality and quantity of input (rainfall) data that represent the catchment behavior is needed in order to get the optimum model parameters. However, it is difficult to get the rainfall data that fulfill the requirement as results of high spatial variability of rainfall data and lack of automatic rainfall recorder that are commonly found in tropical regions. To overcome the above problem, the filter separation autoregressive model might be used to estimate the rainfall time series based on runoff data only. The resulted rainfall together with the runoff data are then used to find the storage function model parameters. The results show that the inversely estimated rainfall was useful for estimating the rainfall-runoff model parameters in topical regions.

AB - Rainfall-runoff models require rainfall and runoff data for determining the model parameters. Problem usually emerges in finding the optimal model parameters due to lack of rainfall data in terms of quantity and quality. In a lumped model such as the storage function model, good quality and quantity of input (rainfall) data that represent the catchment behavior is needed in order to get the optimum model parameters. However, it is difficult to get the rainfall data that fulfill the requirement as results of high spatial variability of rainfall data and lack of automatic rainfall recorder that are commonly found in tropical regions. To overcome the above problem, the filter separation autoregressive model might be used to estimate the rainfall time series based on runoff data only. The resulted rainfall together with the runoff data are then used to find the storage function model parameters. The results show that the inversely estimated rainfall was useful for estimating the rainfall-runoff model parameters in topical regions.

UR - http://www.scopus.com/inward/record.url?scp=2442565826&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2442565826&partnerID=8YFLogxK

M3 - Article

VL - 47

SP - 129

EP - 138

JO - Journal of the Faculty of Agriculture, Kyushu University

JF - Journal of the Faculty of Agriculture, Kyushu University

SN - 0023-6152

IS - 1

ER -