Design and Implementation of DC Pulsed Power Supply Employing Self-Excited Induction Generators and Flywheels for Toroidal Field Coils of a Tokamak Device, PLATO

Masamichi Murayama, Shuhei Kato, Akihide Fujisawa, Keisuke Matsuoka, Hiroaki Tsutsui, Shunji Tsuji-Iio, Ryuichi Shimada

研究成果: Contribution to journalArticle査読

抄録

Tokamak devices with non-superconducting coils must be equipped with pulsed power supplies employing energy storage system when the devices cannot receive electricity from power grids directly. Flywheel energy storage system (FESS) for the coil power supplies have been used only in large or middle-sized tokamak devices since they employed synchronous motor generators (SMGs), which have difficulty in downsizing and maintenance. In our previous research, FESS with induction motor generators (IMGs) utilizing self-excited phenomena was developed. In this paper, using two novel concepts of multiple IMGs and installing a multistage converter, both of design flexibility and coil current ripple reductions are realized. As an experimental result, a peak load power of 778 kW and an electric energy supply of 408 kJ to the dummy coil were achieved using a toroidal field coil power supply (TFCPS) of a tokamak device, PLATO.

本文言語英語
論文番号9042294
ジャーナルIEEE Transactions on Applied Superconductivity
30
4
DOI
出版ステータス出版済み - 6 2020

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学

フィンガープリント

「Design and Implementation of DC Pulsed Power Supply Employing Self-Excited Induction Generators and Flywheels for Toroidal Field Coils of a Tokamak Device, PLATO」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル