Design and implementation of dual-mode inductors for dual-band wireless power transfer systems

研究成果: Contribution to journalArticle査読

9 被引用数 (Scopus)

抄録

We propose a dual-band wireless power transfer (WPT) system employing a dual-mode inductor. The dual-mode inductor is possible through enforcing a self-resonance condition by loading an inductor in series by a tank circuit. In return, two distinct resonances are achieved, simultaneously, utilizing a single compensation capacitor as the inductance of the dual-mode inductor appears with a smaller value after its self-resonance. Also, by maintaining the same mutual coupling, the coupling coefficient becomes larger at the higher resonance, which allows for the employment of the same source/load admittance inversion network to achieve maximum power transfer at both of the operating frequency bands, concurrently. We verify the operation by fabricating a dual-band WPT system, which shows measured efficiencies of 70% and 69% at 90.3 MHz and 138.8 MHz, correspondingly. The size of the WPT system is \boldsymbol {50} \boldsymbol {\times } \boldsymbol {50} mm ^{\boldsymbol {2}} and has a transfer distance of 40 mm.

本文言語英語
論文番号8546792
ページ(範囲)1287-1291
ページ数5
ジャーナルIEEE Transactions on Circuits and Systems II: Express Briefs
66
8
DOI
出版ステータス出版済み - 8 2019

All Science Journal Classification (ASJC) codes

  • 電子工学および電気工学

フィンガープリント

「Design and implementation of dual-mode inductors for dual-band wireless power transfer systems」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル