Design and performance of an innovative four-bed, three-stage adsorption cycle

Abul Fazal Mohammad Mizanur Rahman, Yuki Ueda, Atsushi Akisawa, Takahiko Miyazaki, Bidyut Baran Saha

    研究成果: ジャーナルへの寄稿学術誌査読

    11 被引用数 (Scopus)

    抄録

    The design of a four-bed three-stage adsorption cycle has been proposed to reduce the volume of the six-bed three-stage adsorption cycle. A simulation model for the proposed innovative cycle was developed to analyse the influence of cycle time on the system performance identifying the specific cooling power (SCP) and coefficient of performance (COP). A particle swarm optimization (PSO) technique was used to optimize the cycle time enabling us to maximize the SCP. PSO results showed that the optimal cycle time was decreased with heat source temperature and SCP value was proportional to heat source temperature. It was found that the proposed cycle could be driven by waste heat as low as 40 °C, along with coolant at 30 °C. Comparative study of optimized result indicated that the proposed cycle increased the performance significantly over a whole range of temperatures from 40 to 70 °C and reduced two adsorbent beds, compared to the six-bed three-stage cycle.

    本文言語英語
    ページ(範囲)1365-1384
    ページ数20
    ジャーナルEnergies
    6
    3
    DOI
    出版ステータス出版済み - 3月 2013

    All Science Journal Classification (ASJC) codes

    • 再生可能エネルギー、持続可能性、環境
    • エネルギー工学および電力技術
    • エネルギー(その他)
    • 制御と最適化
    • 電子工学および電気工学

    フィンガープリント

    「Design and performance of an innovative four-bed, three-stage adsorption cycle」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル