Design study on future accelerator magnets using largely keystoned cables

K. Ishibashi, K. Kamezawa, A. Katase, A. Terashima, Y. Sakakibara, Y. Funahashi, H. H. Hirabayashi

研究成果: Contribution to journalArticle査読

抄録

In the near future, superconducting magnets with a small beam aperture will be required for high energy proton colliders. When coils are designed to be self arched over a small beam pipe, it simplifies the magnet construction both in the winding procedure and in the field quality control. Fabrication of these coils requires cables with large keystone angles. A new structure of “braid-in-strands” is devised to produce these cables. Two types of magnet coils are studied for use of these cables. The straight section of a magnet has been fabricated as a preliminary test. Strand positions have all been measured on the cross section of the coil. Magnetic field analysis is made on the basis of the position data of the strands.

本文言語英語
ページ(範囲)1628-1631
ページ数4
ジャーナルIEEE Transactions on Magnetics
25
2
DOI
出版ステータス出版済み - 3 1989

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

フィンガープリント 「Design study on future accelerator magnets using largely keystoned cables」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル