Detection of magnetic nanoparticle utilizing cooled pickup coil and SQUID picovoltmeter

Kazuya Tazoh, Shinya Nabekura, Keiji Enpuku

研究成果: ジャーナルへの寄稿学術誌査読

抄録

Measurement system using cooled pickup coil and superconducting quantum interference device (SQUID) picovoltmeter was developed to detect magnetic nanoparticles for bio-sensing application. The susceptibility measurement method using an excitation field was used to detect the magnetic nanoparticles. We first showed a method to cancel noise from direct flux-linkage of excitation field in order to measure weak signal field in the presence of large excitation field. Next, we clarified the properties of the magnetic filed generated from the particles, such as lift-off dependence and the spatial variation of the signal field. Good agreement was obtained between experiment and analysis. Analyzing the contour map of the signal field, we could identify the three dimensional position of the particles. At present, we could detect Fe 3O4 particles with weight of 200μg at the lift-off of 30mm. Methods to further improve the system performance were also discussed.

本文言語英語
ページ(範囲)37-42
ページ数6
ジャーナルResearch Reports on Information Science and Electrical Engineering of Kyushu University
13
1
出版ステータス出版済み - 3月 2008

!!!All Science Journal Classification (ASJC) codes

  • コンピュータ サイエンス(全般)
  • 電子工学および電気工学

フィンガープリント

「Detection of magnetic nanoparticle utilizing cooled pickup coil and SQUID picovoltmeter」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル