Determination of hydrogen compatibility for solution-treated austenitic stainless steels based on a newly proposed nickel-equivalent equation

Setsuo Takaki, Shigenobu Nanba, Kazunari Imakawa, Arnaud Macadre, Junichiro Yamabe, Hisao Matsunaga, Saburo Matsuoka

研究成果: Contribution to journalArticle

24 被引用数 (Scopus)

抄録

The nickel-equivalent equation for the materials selection of solution-treated austenitic stainless steels in present Japanese regulations does not consider nitrogen, which can improve resistance to hydrogen embrittlement. For the authorization of various austenitic stainless steels for use in high-pressure hydrogen gas and based on investigations of eight types of solution-treated austenitic stainless steels, this paper presented a newly proposed nickel-equivalent equation considering nitrogen. After tensile testing to the true strain ε of 0.3 in air at both room temperature (RT) and 228 K, the strain-induced martensite content VM was measured by a saturation magnetization technique; the VM correlated well with the proposed nickel-equivalent equation. For slow strain rate tensile (SSRT) testing in hydrogen gas at RT, the relative reduction in area (RRA) was consistently lower with increased VM for ε = 0.3 at 228 K. This suggests that the austenitic phase stability is crucial in determining the RRA of the present austenitic stainless steels and the RRA was successfully quantified by the proposed equation.

本文言語英語
ページ(範囲)15095-15100
ページ数6
ジャーナルInternational Journal of Hydrogen Energy
41
33
DOI
出版ステータス出版済み - 9 7 2016

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Condensed Matter Physics
  • Energy Engineering and Power Technology

フィンガープリント 「Determination of hydrogen compatibility for solution-treated austenitic stainless steels based on a newly proposed nickel-equivalent equation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル