Developing a processing route for grain refinement in an Al-6061 metal matrix composite

Yi Huang, Cheng Xu, Minoru Furukawa, Zenji Horita, Terence G. Langdon

研究成果: 会議への寄与タイプ論文

抜粋

Equal channel angular pressing (ECAP) was applied to an Al-6061 metal matrix composite reinforced with alumina particles. Although pressing is generally difficult with this composite, it is shown that the use of a solid solution treatment prior to pressing provides an opportunity to perform the pressing at room temperature for up to a total of five passes through the die. Samples were pressed and the mechanical properties examined in the as-pressed condition. These results are described including the effect of a post-ECAP peak-ageing treatment.

元の言語英語
ページ357-364
ページ数8
出版物ステータス出版済み - 7 21 2003
イベントHot Deformation od Aluminum Alloys III - San Diego, CA, 米国
継続期間: 3 2 20033 6 2003

その他

その他Hot Deformation od Aluminum Alloys III
米国
San Diego, CA
期間3/2/033/6/03

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys

これを引用

Huang, Y., Xu, C., Furukawa, M., Horita, Z., & Langdon, T. G. (2003). Developing a processing route for grain refinement in an Al-6061 metal matrix composite. 357-364. 論文発表場所 Hot Deformation od Aluminum Alloys III, San Diego, CA, 米国.