Development and characterization of a flat laminate vapor chamber

Kei Mizuta, Rinkoh Fukunaga, Kenji Fukuda, Susumu Nii, Tanemasa Asano

研究成果: ジャーナルへの寄稿記事

17 引用 (Scopus)

抄録

Developed was a type of flat laminate vapor chamber called FGHP (Fine Grid Heat Pipe), and its thermal performance was investigated. Fine etching technique enabled formation of microstructures on laminate parts. The size of FGHP utilized in this study was 50 × 50 mm2 and 2 mm thick. For reference, tested was a copper heat spreader having the same dimensions. Without regarding the heat input, the FGHP showed more uniform temperature distribution than the copper heat spreader. Even at a high heat flux, more than 2.0 MW m−2, the FGHP had a thermal resistance as low as 0.08 K W−1, which is about a quarter of that of the copper heat spreader. When thermal resistance of the FGHP was compared with various types of flat heat pipes or vapor chambers, it was the lowest among the all vapor chambers by taking the effect of area ratio into account.

元の言語英語
ページ(範囲)461-471
ページ数11
ジャーナルApplied Thermal Engineering
104
DOI
出版物ステータス出版済み - 7 5 2016

Fingerprint

Heat pipes
Laminates
Vapors
Spreaders
Copper
Heat resistance
Heat flux
Etching
Temperature distribution
Hot Temperature
Microstructure

All Science Journal Classification (ASJC) codes

  • Energy Engineering and Power Technology
  • Industrial and Manufacturing Engineering

これを引用

Development and characterization of a flat laminate vapor chamber. / Mizuta, Kei; Fukunaga, Rinkoh; Fukuda, Kenji; Nii, Susumu; Asano, Tanemasa.

:: Applied Thermal Engineering, 巻 104, 05.07.2016, p. 461-471.

研究成果: ジャーナルへの寄稿記事

Mizuta, Kei ; Fukunaga, Rinkoh ; Fukuda, Kenji ; Nii, Susumu ; Asano, Tanemasa. / Development and characterization of a flat laminate vapor chamber. :: Applied Thermal Engineering. 2016 ; 巻 104. pp. 461-471.
@article{93234a2d04ba4591b4b8596c7fa0b07b,
title = "Development and characterization of a flat laminate vapor chamber",
abstract = "Developed was a type of flat laminate vapor chamber called FGHP (Fine Grid Heat Pipe), and its thermal performance was investigated. Fine etching technique enabled formation of microstructures on laminate parts. The size of FGHP utilized in this study was 50 × 50 mm2 and 2 mm thick. For reference, tested was a copper heat spreader having the same dimensions. Without regarding the heat input, the FGHP showed more uniform temperature distribution than the copper heat spreader. Even at a high heat flux, more than 2.0 MW m−2, the FGHP had a thermal resistance as low as 0.08 K W−1, which is about a quarter of that of the copper heat spreader. When thermal resistance of the FGHP was compared with various types of flat heat pipes or vapor chambers, it was the lowest among the all vapor chambers by taking the effect of area ratio into account.",
author = "Kei Mizuta and Rinkoh Fukunaga and Kenji Fukuda and Susumu Nii and Tanemasa Asano",
year = "2016",
month = "7",
day = "5",
doi = "10.1016/j.applthermaleng.2016.05.080",
language = "English",
volume = "104",
pages = "461--471",
journal = "Applied Thermal Engineering",
issn = "1359-4311",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Development and characterization of a flat laminate vapor chamber

AU - Mizuta, Kei

AU - Fukunaga, Rinkoh

AU - Fukuda, Kenji

AU - Nii, Susumu

AU - Asano, Tanemasa

PY - 2016/7/5

Y1 - 2016/7/5

N2 - Developed was a type of flat laminate vapor chamber called FGHP (Fine Grid Heat Pipe), and its thermal performance was investigated. Fine etching technique enabled formation of microstructures on laminate parts. The size of FGHP utilized in this study was 50 × 50 mm2 and 2 mm thick. For reference, tested was a copper heat spreader having the same dimensions. Without regarding the heat input, the FGHP showed more uniform temperature distribution than the copper heat spreader. Even at a high heat flux, more than 2.0 MW m−2, the FGHP had a thermal resistance as low as 0.08 K W−1, which is about a quarter of that of the copper heat spreader. When thermal resistance of the FGHP was compared with various types of flat heat pipes or vapor chambers, it was the lowest among the all vapor chambers by taking the effect of area ratio into account.

AB - Developed was a type of flat laminate vapor chamber called FGHP (Fine Grid Heat Pipe), and its thermal performance was investigated. Fine etching technique enabled formation of microstructures on laminate parts. The size of FGHP utilized in this study was 50 × 50 mm2 and 2 mm thick. For reference, tested was a copper heat spreader having the same dimensions. Without regarding the heat input, the FGHP showed more uniform temperature distribution than the copper heat spreader. Even at a high heat flux, more than 2.0 MW m−2, the FGHP had a thermal resistance as low as 0.08 K W−1, which is about a quarter of that of the copper heat spreader. When thermal resistance of the FGHP was compared with various types of flat heat pipes or vapor chambers, it was the lowest among the all vapor chambers by taking the effect of area ratio into account.

UR - http://www.scopus.com/inward/record.url?scp=84989911515&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84989911515&partnerID=8YFLogxK

U2 - 10.1016/j.applthermaleng.2016.05.080

DO - 10.1016/j.applthermaleng.2016.05.080

M3 - Article

AN - SCOPUS:84989911515

VL - 104

SP - 461

EP - 471

JO - Applied Thermal Engineering

JF - Applied Thermal Engineering

SN - 1359-4311

ER -