Development and evaluation of a two-axial shearing force sensor consisting of an optical sensor chip and elastic gum frame

Toshihiro Takeshita, Kota Harisaki, Hideyuki Ando, Eiji Higurashi, Hirofumi Nogami, Renshi Sawada

    研究成果: Contribution to journalArticle査読

    10 被引用数 (Scopus)

    抄録

    We developed a promising shearing force sensor that is small in size and can measure shearing force along two axes independently. This sensor consists of an elastic gum frame and an optical sensor chip (6 mm × 6 mm × 8 mm). From the experimental results, the resolutions of the sensor along the x- and y-axes are found to be 0.070 N and 0.063 N. We also experimentally demonstrated that the sensor can separately measure shearing force along two axes. Finally, we demonstrated that the scale factor which correspond to resolution and linear portion which correspond to measuring range of the signals can be changed easily by using three types of elastic gum frame. This sensor can be embedded in the finger of a robot hand and use it to not only measure shearing force but also detect the slip phenomenon.

    本文言語英語
    ページ(範囲)136-142
    ページ数7
    ジャーナルPrecision Engineering
    45
    DOI
    出版ステータス出版済み - 7 1 2016

    All Science Journal Classification (ASJC) codes

    • 工学(全般)

    フィンガープリント

    「Development and evaluation of a two-axial shearing force sensor consisting of an optical sensor chip and elastic gum frame」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル