Development and practical application of fire-resistant steel for buildings

Rikio Chijiiwa, Yuzuru Yoshida, Ryuji Uemori, Hiroshi Tamehiro, Kazuo Funato, Yukihiko Horii

研究成果: Chapter in Book/Report/Conference proceedingOther chapter contribution

24 被引用数 (Scopus)

抄録

In steel-frame buildings, steel members should be protected by spraying fire-resistant materials so as not to be heated to higher than 350 °C during fires. The work of spraying fire-resistant materials, however, has an injurious effect on the workers' health and is a time-consuming job. In addition, the usable space of the building is reduced by such fire-resistant coating. Therefore, there has been an increasing demand for restricting fire-resistant coatings. The development of fire-resistant steels for buildings was aimed at increasing steel's elevated-temperature strength while assuring earthquake resistance, weldability and other properties equal to or better than those of conventional steels for buildings. This paper first describes fundamental studies made of the effects of alloying elements and manufacturing conditions on elevated-temperature strength, and then presents the development of a fire-resistant steel which provides high strength at 600 °C while ensuring good earthquake resistance and weldability.

本文言語英語
ホスト出版物のタイトルNippon Steel Technical Report
出版社Publ by Nippon Steel Corp
ページ47-55
ページ数9
58
出版ステータス出版済み - 7 1993
外部発表はい

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Development and practical application of fire-resistant steel for buildings」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル