Development of a 22kV/6.9kV single-phase model for a 3MVA HTS power transformer

Kazuo Funaki, Masataka Iwakuma, Kazuhiro Kajikawa, Masanori Hara, Junya Suehiro, Takehiro Ito, Yasuyuki Takata, Takaaki Bohno, Shin Ichi Nose, Masayuki Konno, Yujiro Yagi, Hiroshi Maruyama, Takenori Ogata, Shigeru Yoshida, Kouichi Ohashi, Hironobu Kimura, Katsuya Tsutsumi

研究成果: Contribution to journalConference article

75 引用 (Scopus)


We have developed a 22kV/6.9kV HTS single-phase transformer cooled by liquid nitrogen for field test, which is a practical model for the single-phase part of a 3MVA HTS power transformer. First, we numerically simulated electromagnetic, mechanical and thermal conditions of the windings in accidental cases of short-circuit and lightning impulse, and considered the winding structure withstanding the severe loads. We constructed a small-sized model coil of Bi-2223 Ag/Mn-sheathed tapes and confirmed applicability of the design concept for the over-current and high-withstand-voltage tests. We designed and constructed a single-phase HTS transformer on the basis of the model-coil-test results. The primary and secondary windings are transposed parallel conductors of two and six Bi-2223 Ag/Mn tapes, respectively. The same tests for the HTS transformer as for usual oil-filled ones indicated the reliable operation and high performance. The field test in a distribution grid of Kyushu Electric Power Co. included inrush-current test and long-term operation of the transformer cooled by a continuous supply system of subcooled liquid nitrogen with cryocoolers.

ジャーナルIEEE Transactions on Applied Superconductivity
発行部数1 II
出版物ステータス出版済み - 3 1 2001
イベント2000 Applied Superconductivity Conference - Virginia Beach, VA, 米国
継続期間: 9 17 20009 22 2000

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント Development of a 22kV/6.9kV single-phase model for a 3MVA HTS power transformer' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Funaki, K., Iwakuma, M., Kajikawa, K., Hara, M., Suehiro, J., Ito, T., Takata, Y., Bohno, T., Nose, S. I., Konno, M., Yagi, Y., Maruyama, H., Ogata, T., Yoshida, S., Ohashi, K., Kimura, H., & Tsutsumi, K. (2001). Development of a 22kV/6.9kV single-phase model for a 3MVA HTS power transformer. IEEE Transactions on Applied Superconductivity, 11(1 II), 1578-1581.