Development of a Large-Capacity Superconducting Cable for 1000 KV A-Class Power Transformers

K. Funaki, M. Iwakuma, S. Satoh, M. Hiramatsu, M. Takeo, K. Yamafuji, S. Nonaka, M. Hoshino, M. Simada, E. S. Yoneda, T. Sasaki, T. Fujioka, T. Kumano, E. Suzuki

研究成果: Contribution to journalArticle査読

12 被引用数 (Scopus)

抄録

We have designed and fabricated a large-capacity superconducting cable for l000kVA-class power transformers. The cable is a triply-stacked multi-strand (6x6x6) type. The elementary strand has 19,050 NbTi filaments of 0.63mm thick in CuNi matrix. The test cable is installed as the secondary winding in a superconducting transformer with iron core in a room-temperature space. The primary winding is the second-level subcable of the secondary one and the turn ratio is nearly 14. The designed capacity of the test cable is 4.545 kA at the secondary voltage of 220V. The peak value of the current, 6.43kA(peak), is 78% of the critical current on the load line. The maximum current of the cable at 60Hz operation was 3.78kA(peak). The attained level of the secondary winding is 47% of the critical current. In the 60Hz operation of a small coil wound by the test cable, premature quench was initiated from the terminals of the cable connected with copper plates. It is suggested from the experimental results that the degradation in maximum current of the test cable is related to current transfer between the cable and the copper terminal plate.

本文言語英語
ページ(範囲)394-397
ページ数4
ジャーナルIEEE Transactions on Magnetics
28
1
DOI
出版ステータス出版済み - 1 1992

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

フィンガープリント 「Development of a Large-Capacity Superconducting Cable for 1000 KV A-Class Power Transformers」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル