Development of a training system for intraoral radiography

研究成果: 著書/レポートタイプへの貢献会議での発言

1 引用 (Scopus)

抄録

Intraoral radiography is one of the effective diagnosis method for dental clinic, which is used to examine dental caries and gum disease. A patient needs to have a small film inserted in their mouth. The position and orientation of the film are properly adjusted by the dentist. An indicator cone which directs X-ray is set up outside the patient's mouth. The intraoral radiograph provide a dental perspective projection image of the patient's teeth, thus the individual differences of patients make it more difficult to take an appropriate radiograph regardless of the experience of dentist. Recently, the skills of intraoral radiography of Japanese dental students and intern doctors are declining. A conventional education method for intraoral radiography currently conducted does not provide enough time to master intraoral radiographic technique for the dental students, because much time to develop the roentgenogram is necessary. This paper describes the development of a training system for intraoral radiography. The system is composed of a notebook computer, two PHANToM Omni devices, and a dental arch model, where the PHANToM Omni devices are used to measure the position and orientation of a indicator cone and film of the system. We applied the computer graphics technique to draw an intraoral radiograph on the computer display, thus the system enables trainees to practice the intraoral radiography without a X-ray machine, lots of film sheets, and time for the development of roentgenogram. In this paper, we present the system structure, a simulation method for generating an intraoral radiography, and simulation results.

元の言語英語
ホスト出版物のタイトルProceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006
ページ3286-3291
ページ数6
DOI
出版物ステータス出版済み - 12 27 2006
イベント2006 IEEE International Conference on Robotics and Automation, ICRA 2006 - Orlando, FL, 米国
継続期間: 5 15 20065 19 2006

出版物シリーズ

名前Proceedings - IEEE International Conference on Robotics and Automation
2006
ISSN(印刷物)1050-4729

その他

その他2006 IEEE International Conference on Robotics and Automation, ICRA 2006
米国
Orlando, FL
期間5/15/065/19/06

Fingerprint

Radiography
Cones
Students
X rays
Laptop computers
Arches
Computer graphics
Education
Display devices

All Science Journal Classification (ASJC) codes

  • Software
  • Control and Systems Engineering
  • Artificial Intelligence
  • Electrical and Electronic Engineering

これを引用

Tokuyasu, T., Yamamoto, M., Okamura, K., & Yoshiura, K. (2006). Development of a training system for intraoral radiography. : Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006 (pp. 3286-3291). [1642203] (Proceedings - IEEE International Conference on Robotics and Automation; 巻数 2006). https://doi.org/10.1109/ROBOT.2006.1642203

Development of a training system for intraoral radiography. / Tokuyasu, Tatsushi; Yamamoto, Motoji; Okamura, Kazutoshi; Yoshiura, Kazunori.

Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. 2006. p. 3286-3291 1642203 (Proceedings - IEEE International Conference on Robotics and Automation; 巻 2006).

研究成果: 著書/レポートタイプへの貢献会議での発言

Tokuyasu, T, Yamamoto, M, Okamura, K & Yoshiura, K 2006, Development of a training system for intraoral radiography. : Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006., 1642203, Proceedings - IEEE International Conference on Robotics and Automation, 巻. 2006, pp. 3286-3291, 2006 IEEE International Conference on Robotics and Automation, ICRA 2006, Orlando, FL, 米国, 5/15/06. https://doi.org/10.1109/ROBOT.2006.1642203
Tokuyasu T, Yamamoto M, Okamura K, Yoshiura K. Development of a training system for intraoral radiography. : Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. 2006. p. 3286-3291. 1642203. (Proceedings - IEEE International Conference on Robotics and Automation). https://doi.org/10.1109/ROBOT.2006.1642203
Tokuyasu, Tatsushi ; Yamamoto, Motoji ; Okamura, Kazutoshi ; Yoshiura, Kazunori. / Development of a training system for intraoral radiography. Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006. 2006. pp. 3286-3291 (Proceedings - IEEE International Conference on Robotics and Automation).
@inproceedings{ed79ff52571b4800a9f3dbc1f866c212,
title = "Development of a training system for intraoral radiography",
abstract = "Intraoral radiography is one of the effective diagnosis method for dental clinic, which is used to examine dental caries and gum disease. A patient needs to have a small film inserted in their mouth. The position and orientation of the film are properly adjusted by the dentist. An indicator cone which directs X-ray is set up outside the patient's mouth. The intraoral radiograph provide a dental perspective projection image of the patient's teeth, thus the individual differences of patients make it more difficult to take an appropriate radiograph regardless of the experience of dentist. Recently, the skills of intraoral radiography of Japanese dental students and intern doctors are declining. A conventional education method for intraoral radiography currently conducted does not provide enough time to master intraoral radiographic technique for the dental students, because much time to develop the roentgenogram is necessary. This paper describes the development of a training system for intraoral radiography. The system is composed of a notebook computer, two PHANToM Omni devices, and a dental arch model, where the PHANToM Omni devices are used to measure the position and orientation of a indicator cone and film of the system. We applied the computer graphics technique to draw an intraoral radiograph on the computer display, thus the system enables trainees to practice the intraoral radiography without a X-ray machine, lots of film sheets, and time for the development of roentgenogram. In this paper, we present the system structure, a simulation method for generating an intraoral radiography, and simulation results.",
author = "Tatsushi Tokuyasu and Motoji Yamamoto and Kazutoshi Okamura and Kazunori Yoshiura",
year = "2006",
month = "12",
day = "27",
doi = "10.1109/ROBOT.2006.1642203",
language = "English",
isbn = "0780395069",
series = "Proceedings - IEEE International Conference on Robotics and Automation",
pages = "3286--3291",
booktitle = "Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006",

}

TY - GEN

T1 - Development of a training system for intraoral radiography

AU - Tokuyasu, Tatsushi

AU - Yamamoto, Motoji

AU - Okamura, Kazutoshi

AU - Yoshiura, Kazunori

PY - 2006/12/27

Y1 - 2006/12/27

N2 - Intraoral radiography is one of the effective diagnosis method for dental clinic, which is used to examine dental caries and gum disease. A patient needs to have a small film inserted in their mouth. The position and orientation of the film are properly adjusted by the dentist. An indicator cone which directs X-ray is set up outside the patient's mouth. The intraoral radiograph provide a dental perspective projection image of the patient's teeth, thus the individual differences of patients make it more difficult to take an appropriate radiograph regardless of the experience of dentist. Recently, the skills of intraoral radiography of Japanese dental students and intern doctors are declining. A conventional education method for intraoral radiography currently conducted does not provide enough time to master intraoral radiographic technique for the dental students, because much time to develop the roentgenogram is necessary. This paper describes the development of a training system for intraoral radiography. The system is composed of a notebook computer, two PHANToM Omni devices, and a dental arch model, where the PHANToM Omni devices are used to measure the position and orientation of a indicator cone and film of the system. We applied the computer graphics technique to draw an intraoral radiograph on the computer display, thus the system enables trainees to practice the intraoral radiography without a X-ray machine, lots of film sheets, and time for the development of roentgenogram. In this paper, we present the system structure, a simulation method for generating an intraoral radiography, and simulation results.

AB - Intraoral radiography is one of the effective diagnosis method for dental clinic, which is used to examine dental caries and gum disease. A patient needs to have a small film inserted in their mouth. The position and orientation of the film are properly adjusted by the dentist. An indicator cone which directs X-ray is set up outside the patient's mouth. The intraoral radiograph provide a dental perspective projection image of the patient's teeth, thus the individual differences of patients make it more difficult to take an appropriate radiograph regardless of the experience of dentist. Recently, the skills of intraoral radiography of Japanese dental students and intern doctors are declining. A conventional education method for intraoral radiography currently conducted does not provide enough time to master intraoral radiographic technique for the dental students, because much time to develop the roentgenogram is necessary. This paper describes the development of a training system for intraoral radiography. The system is composed of a notebook computer, two PHANToM Omni devices, and a dental arch model, where the PHANToM Omni devices are used to measure the position and orientation of a indicator cone and film of the system. We applied the computer graphics technique to draw an intraoral radiograph on the computer display, thus the system enables trainees to practice the intraoral radiography without a X-ray machine, lots of film sheets, and time for the development of roentgenogram. In this paper, we present the system structure, a simulation method for generating an intraoral radiography, and simulation results.

UR - http://www.scopus.com/inward/record.url?scp=33845674252&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33845674252&partnerID=8YFLogxK

U2 - 10.1109/ROBOT.2006.1642203

DO - 10.1109/ROBOT.2006.1642203

M3 - Conference contribution

SN - 0780395069

SN - 9780780395060

T3 - Proceedings - IEEE International Conference on Robotics and Automation

SP - 3286

EP - 3291

BT - Proceedings 2006 IEEE International Conference on Robotics and Automation, ICRA 2006

ER -