Development of camera model and calibration procedure for an oblique-viewing endoscope

Tetsuzo Yamaguchi, Masahiko Nakamoto, Yoshinobu Sato, Makoto Hashizume, Nobuhiko Sugano, Hideki Yoshikawa, Shinichi Tamura

研究成果: Contribution to journalArticle

2 被引用数 (Scopus)

抄録

This paper proposes a camera projection model for an oblique-viewing endoscope, intended for application to an extended virtual reality system. The oblique-viewing endoscope differs from the forward-viewing endoscope by the fact that the view field can be shifted by rotating the scope cylinder. The projection model proposed in this study describes the systematic relation between the rotation angle of the scope cylinder and the external parameters of the camera model. A calibration method is also proposed for estimating the parameters of the projection model, and its accuracy is investigated. The oblique-viewing projection model is derived as an extension of the general pinhole camera model by adding two axes of rotation as parameters and using the angle of rotation of the scope cylinder as the input. In the experiment, an abdominal endoscope is used as the real equipment. A rotary encoder with an angular resolution of 0.25° is used to input the rotation angle of the scope cylinder. The accuracy is examined by the above condition for a scope cylinder rotation angle of 0 to 132°. The average projection error in the proposed model is 2.4 pixels. When the parameters needed in the model are not estimated, the error is increased to 5 to 8 pixels compared to the case in which they are estimated. It is thus shown that the parameters of the proposed model are indispensable in the description of the actual oblique-viewing endoscope. Even if the number of data points for each angle is 2, an accuracy such that the average error is less than 2.8 pixels is obtained.

元の言語英語
ページ(範囲)19-31
ページ数13
ジャーナルElectronics and Communications in Japan, Part II: Electronics (English translation of Denshi Tsushin Gakkai Ronbunshi)
88
発行部数2
DOI
出版物ステータス出版済み - 2 2005

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)
  • Computer Networks and Communications
  • Electrical and Electronic Engineering

フィンガープリント 「Development of camera model and calibration procedure for an oblique-viewing endoscope」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル