Development of Fe base phase change materials for high temperature using solid-solid transformation

Koki Nishioka, Naoyuki Suura, Ko-Ichiro Ohno, Takayuki Maeda, Masakata Shimizu

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.

元の言語英語
ページ(範囲)1240-1244
ページ数5
ジャーナルISIJ International
50
発行部数9
DOI
出版物ステータス出版済み - 11 30 2010

Fingerprint

Phase change materials
Latent heat
Durability
Waste heat utilization
Exhaust gases
Temperature
Differential scanning calorimetry
Heat treatment
Costs
Experiments

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

Development of Fe base phase change materials for high temperature using solid-solid transformation. / Nishioka, Koki; Suura, Naoyuki; Ohno, Ko-Ichiro; Maeda, Takayuki; Shimizu, Masakata.

:: ISIJ International, 巻 50, 番号 9, 30.11.2010, p. 1240-1244.

研究成果: ジャーナルへの寄稿記事

Nishioka, Koki ; Suura, Naoyuki ; Ohno, Ko-Ichiro ; Maeda, Takayuki ; Shimizu, Masakata. / Development of Fe base phase change materials for high temperature using solid-solid transformation. :: ISIJ International. 2010 ; 巻 50, 番号 9. pp. 1240-1244.
@article{12a73fda4f9b4743881826f39c0eeaee,
title = "Development of Fe base phase change materials for high temperature using solid-solid transformation",
abstract = "Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.",
author = "Koki Nishioka and Naoyuki Suura and Ko-Ichiro Ohno and Takayuki Maeda and Masakata Shimizu",
year = "2010",
month = "11",
day = "30",
doi = "10.2355/isijinternational.50.1240",
language = "English",
volume = "50",
pages = "1240--1244",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "9",

}

TY - JOUR

T1 - Development of Fe base phase change materials for high temperature using solid-solid transformation

AU - Nishioka, Koki

AU - Suura, Naoyuki

AU - Ohno, Ko-Ichiro

AU - Maeda, Takayuki

AU - Shimizu, Masakata

PY - 2010/11/30

Y1 - 2010/11/30

N2 - Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.

AB - Fe base Phase Change Materials (PCM) for high temperature around 953-1 273 K using multiple solid-solid transformations were developed. The amount of latent heat of PCM samples were measured by Differential Scanning Calorimetry. The amount of latent heat of Fe-xCo samples increased with increasing Co addition. The reducing atmosphere was suitable for the samples developed in this work. The durability performance of samples was confirmed by heat treatment experiments. From the viewpoint of heat accumulation/supply ability, cost and durability performance, Fe-Co(-Cr) system alloy is one of the most suitable Phase Change Materials for heat recovery from high temperature exhaust gases.

UR - http://www.scopus.com/inward/record.url?scp=78649368665&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78649368665&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.50.1240

DO - 10.2355/isijinternational.50.1240

M3 - Article

VL - 50

SP - 1240

EP - 1244

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 9

ER -