Development of FET-type CO2 sensor operative at room temperature

Kengo Shimanoe, Kohei Goto, Kenji Obata, Seiji Nakata, Go Sakai, Noboru Yamazoe

研究成果: ジャーナルへの寄稿記事

14 引用 (Scopus)

抄録

An FET-type CO2 sensor operative at room temperature was developed by stacking a powder mixture of metal carbonate (auxiliary phase) - indium tin oxide (ITO, sensing electrode) as well as Na+-exchanged cation exchange membrane (ionic conductor gate) on an FET chip. Both ITO and the cation exchange membrane were indispensable to obtain stable response to CO2 at room temperature, while the auxiliary phase was optimized to be Li2CO3-BaCO3 (1:3 in molar ratio) from the stability of response against the disturbance by humidity. The device, Li 2CO3-BaCO3-ITO (1:3:1)/Na+-exchanged cation exchange membrane/FET, exhibited excellent CO2-sensing characteristics at 30°C. The response in gate-source voltage (V GS) was linear to the logarithm of CO2 concentration, with its slopes indicating n = 2.0 where n is the number of reaction electrons involved in the electrochemical reduction per CO2. The Nernst's correlation was fairly stable against a change in RH between 30 and 70%. The times for 90% response and 90% recovery to switching-on and -off 3000 ppm CO2 were 1 and 2 min, respectively.

元の言語英語
ページ(範囲)14-19
ページ数6
ジャーナルSensors and Actuators, B: Chemical
102
発行部数1
DOI
出版物ステータス出版済み - 9 1 2004

Fingerprint

Field effect transistors
Cations
Ion exchange
field effect transistors
ITO (semiconductors)
Positive ions
Membranes
sensors
Sensors
room temperature
membranes
cations
Carbonates
Tin oxides
Powders
Indium
Temperature
Atmospheric humidity
Metals
logarithms

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

これを引用

Development of FET-type CO2 sensor operative at room temperature. / Shimanoe, Kengo; Goto, Kohei; Obata, Kenji; Nakata, Seiji; Sakai, Go; Yamazoe, Noboru.

:: Sensors and Actuators, B: Chemical, 巻 102, 番号 1, 01.09.2004, p. 14-19.

研究成果: ジャーナルへの寄稿記事

Shimanoe, Kengo ; Goto, Kohei ; Obata, Kenji ; Nakata, Seiji ; Sakai, Go ; Yamazoe, Noboru. / Development of FET-type CO2 sensor operative at room temperature. :: Sensors and Actuators, B: Chemical. 2004 ; 巻 102, 番号 1. pp. 14-19.
@article{9d527c52de054052af1d8c2459133f8f,
title = "Development of FET-type CO2 sensor operative at room temperature",
abstract = "An FET-type CO2 sensor operative at room temperature was developed by stacking a powder mixture of metal carbonate (auxiliary phase) - indium tin oxide (ITO, sensing electrode) as well as Na+-exchanged cation exchange membrane (ionic conductor gate) on an FET chip. Both ITO and the cation exchange membrane were indispensable to obtain stable response to CO2 at room temperature, while the auxiliary phase was optimized to be Li2CO3-BaCO3 (1:3 in molar ratio) from the stability of response against the disturbance by humidity. The device, Li 2CO3-BaCO3-ITO (1:3:1)/Na+-exchanged cation exchange membrane/FET, exhibited excellent CO2-sensing characteristics at 30°C. The response in gate-source voltage (V GS) was linear to the logarithm of CO2 concentration, with its slopes indicating n = 2.0 where n is the number of reaction electrons involved in the electrochemical reduction per CO2. The Nernst's correlation was fairly stable against a change in RH between 30 and 70{\%}. The times for 90{\%} response and 90{\%} recovery to switching-on and -off 3000 ppm CO2 were 1 and 2 min, respectively.",
author = "Kengo Shimanoe and Kohei Goto and Kenji Obata and Seiji Nakata and Go Sakai and Noboru Yamazoe",
year = "2004",
month = "9",
day = "1",
doi = "10.1016/j.snb.2003.11.037",
language = "English",
volume = "102",
pages = "14--19",
journal = "Sensors and Actuators, B: Chemical",
issn = "0925-4005",
publisher = "Elsevier",
number = "1",

}

TY - JOUR

T1 - Development of FET-type CO2 sensor operative at room temperature

AU - Shimanoe, Kengo

AU - Goto, Kohei

AU - Obata, Kenji

AU - Nakata, Seiji

AU - Sakai, Go

AU - Yamazoe, Noboru

PY - 2004/9/1

Y1 - 2004/9/1

N2 - An FET-type CO2 sensor operative at room temperature was developed by stacking a powder mixture of metal carbonate (auxiliary phase) - indium tin oxide (ITO, sensing electrode) as well as Na+-exchanged cation exchange membrane (ionic conductor gate) on an FET chip. Both ITO and the cation exchange membrane were indispensable to obtain stable response to CO2 at room temperature, while the auxiliary phase was optimized to be Li2CO3-BaCO3 (1:3 in molar ratio) from the stability of response against the disturbance by humidity. The device, Li 2CO3-BaCO3-ITO (1:3:1)/Na+-exchanged cation exchange membrane/FET, exhibited excellent CO2-sensing characteristics at 30°C. The response in gate-source voltage (V GS) was linear to the logarithm of CO2 concentration, with its slopes indicating n = 2.0 where n is the number of reaction electrons involved in the electrochemical reduction per CO2. The Nernst's correlation was fairly stable against a change in RH between 30 and 70%. The times for 90% response and 90% recovery to switching-on and -off 3000 ppm CO2 were 1 and 2 min, respectively.

AB - An FET-type CO2 sensor operative at room temperature was developed by stacking a powder mixture of metal carbonate (auxiliary phase) - indium tin oxide (ITO, sensing electrode) as well as Na+-exchanged cation exchange membrane (ionic conductor gate) on an FET chip. Both ITO and the cation exchange membrane were indispensable to obtain stable response to CO2 at room temperature, while the auxiliary phase was optimized to be Li2CO3-BaCO3 (1:3 in molar ratio) from the stability of response against the disturbance by humidity. The device, Li 2CO3-BaCO3-ITO (1:3:1)/Na+-exchanged cation exchange membrane/FET, exhibited excellent CO2-sensing characteristics at 30°C. The response in gate-source voltage (V GS) was linear to the logarithm of CO2 concentration, with its slopes indicating n = 2.0 where n is the number of reaction electrons involved in the electrochemical reduction per CO2. The Nernst's correlation was fairly stable against a change in RH between 30 and 70%. The times for 90% response and 90% recovery to switching-on and -off 3000 ppm CO2 were 1 and 2 min, respectively.

UR - http://www.scopus.com/inward/record.url?scp=4344680196&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4344680196&partnerID=8YFLogxK

U2 - 10.1016/j.snb.2003.11.037

DO - 10.1016/j.snb.2003.11.037

M3 - Article

AN - SCOPUS:4344680196

VL - 102

SP - 14

EP - 19

JO - Sensors and Actuators, B: Chemical

JF - Sensors and Actuators, B: Chemical

SN - 0925-4005

IS - 1

ER -