Development of high-performance cooling devices for space application by using flow boiling in narrow channels

Shinichi Miura, Yukihiro Inada, Shinmoto Yasuhisa, Haruhiko Ohta

研究成果: 著書/レポートタイプへの貢献

抄録

Heat generation density from semiconductor devices has been increasing with the rapid development of electronic technology. The cooling system using boiling two-phase phenomena has attracted much attention because of its high heat removal potential. To develop compact and high-performance cooling systems, we conducted experiments on the increase of critical heat flux (CHF) for flow boiling in narrow channels by improved liquid supply. A large surface of 150 mm in heated length and 30 mm in width with grooves of an apex angle of 90°, 0.5-mm depth, and 1 mm in pitch was employed. A structure of narrow heated channel between parallel plates with an unheated auxiliary channel was devised and tested by using water for different combinations of gap sizes and volumetric flow rates, where inlet of the main heated channel and the outlet of auxiliary unheated channel were closed to prevent the flow instability observed frequently at low flow rate for parallel two channels. For the total volumetric flow rate more than 4.5 × 10-5 m3/s, higher values of CHF large than 2 × 106 W/m2 were obtained for gap size of 2 mm. For gap sizes of 2 mm and 5 mm at high volumetric flow rate larger than 6.0 × 10-5 m3/s, or mass velocity based on the cross section are of main heated channel 958.1 kg/m2s and 383.2 kg/m2 s, respectively, the extension of dry patches was observed at the upstream location of the main heated channel resulting in burnout not at the downstream but at the upstream. By the increase in total volumetric flow rate, the pressure drop increased because of increasing in the flow rate passing through the sintered metal porous plates connecting both channels. The values of pressure drop for gap size of 2 mm were higher than that for gap size of 5 mm. When the performance of the cooling system was evaluated on the basis of pump power, ignoring its variation in the efficiency with volumetric flow rate, that is, the power defined as the product of the pressure drop and the total volumetric flow rate, higher values of CHF were obtained for gap size of 5 mm as far as the same pump power was concerned.

元の言語英語
ホスト出版物のタイトルInterdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences
出版者Blackwell Publishing Inc.
ページ192-201
ページ数10
ISBN(印刷物)9781573317122
DOI
出版物ステータス出版済み - 1 1 2009

出版物シリーズ

名前Annals of the New York Academy of Sciences
1161
ISSN(印刷物)0077-8923
ISSN(電子版)1749-6632

Fingerprint

Space applications
Boiling liquids
Hot Temperature
Flow rate
Cooling
Equipment and Supplies
Pressure
Cooling systems
Pressure drop
Heat flux
Semiconductors
Pumps
Porous plates
Metals
Heat generation
Technology
Semiconductor devices
Water
Heat
Liquids

All Science Journal Classification (ASJC) codes

  • Neuroscience(all)
  • Biochemistry, Genetics and Molecular Biology(all)
  • History and Philosophy of Science

これを引用

Miura, S., Inada, Y., Yasuhisa, S., & Ohta, H. (2009). Development of high-performance cooling devices for space application by using flow boiling in narrow channels. : Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences (pp. 192-201). (Annals of the New York Academy of Sciences; 巻数 1161). Blackwell Publishing Inc.. https://doi.org/10.1111/j.1749-6632.2009.04082.x

Development of high-performance cooling devices for space application by using flow boiling in narrow channels. / Miura, Shinichi; Inada, Yukihiro; Yasuhisa, Shinmoto; Ohta, Haruhiko.

Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences. Blackwell Publishing Inc., 2009. p. 192-201 (Annals of the New York Academy of Sciences; 巻 1161).

研究成果: 著書/レポートタイプへの貢献

Miura, S, Inada, Y, Yasuhisa, S & Ohta, H 2009, Development of high-performance cooling devices for space application by using flow boiling in narrow channels. : Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences. Annals of the New York Academy of Sciences, 巻. 1161, Blackwell Publishing Inc., pp. 192-201. https://doi.org/10.1111/j.1749-6632.2009.04082.x
Miura S, Inada Y, Yasuhisa S, Ohta H. Development of high-performance cooling devices for space application by using flow boiling in narrow channels. : Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences. Blackwell Publishing Inc. 2009. p. 192-201. (Annals of the New York Academy of Sciences). https://doi.org/10.1111/j.1749-6632.2009.04082.x
Miura, Shinichi ; Inada, Yukihiro ; Yasuhisa, Shinmoto ; Ohta, Haruhiko. / Development of high-performance cooling devices for space application by using flow boiling in narrow channels. Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences. Blackwell Publishing Inc., 2009. pp. 192-201 (Annals of the New York Academy of Sciences).
@inbook{8527f210795d4b268ccb5f32e4cee9c8,
title = "Development of high-performance cooling devices for space application by using flow boiling in narrow channels",
abstract = "Heat generation density from semiconductor devices has been increasing with the rapid development of electronic technology. The cooling system using boiling two-phase phenomena has attracted much attention because of its high heat removal potential. To develop compact and high-performance cooling systems, we conducted experiments on the increase of critical heat flux (CHF) for flow boiling in narrow channels by improved liquid supply. A large surface of 150 mm in heated length and 30 mm in width with grooves of an apex angle of 90°, 0.5-mm depth, and 1 mm in pitch was employed. A structure of narrow heated channel between parallel plates with an unheated auxiliary channel was devised and tested by using water for different combinations of gap sizes and volumetric flow rates, where inlet of the main heated channel and the outlet of auxiliary unheated channel were closed to prevent the flow instability observed frequently at low flow rate for parallel two channels. For the total volumetric flow rate more than 4.5 × 10-5 m3/s, higher values of CHF large than 2 × 106 W/m2 were obtained for gap size of 2 mm. For gap sizes of 2 mm and 5 mm at high volumetric flow rate larger than 6.0 × 10-5 m3/s, or mass velocity based on the cross section are of main heated channel 958.1 kg/m2s and 383.2 kg/m2 s, respectively, the extension of dry patches was observed at the upstream location of the main heated channel resulting in burnout not at the downstream but at the upstream. By the increase in total volumetric flow rate, the pressure drop increased because of increasing in the flow rate passing through the sintered metal porous plates connecting both channels. The values of pressure drop for gap size of 2 mm were higher than that for gap size of 5 mm. When the performance of the cooling system was evaluated on the basis of pump power, ignoring its variation in the efficiency with volumetric flow rate, that is, the power defined as the product of the pressure drop and the total volumetric flow rate, higher values of CHF were obtained for gap size of 5 mm as far as the same pump power was concerned.",
author = "Shinichi Miura and Yukihiro Inada and Shinmoto Yasuhisa and Haruhiko Ohta",
year = "2009",
month = "1",
day = "1",
doi = "10.1111/j.1749-6632.2009.04082.x",
language = "English",
isbn = "9781573317122",
series = "Annals of the New York Academy of Sciences",
publisher = "Blackwell Publishing Inc.",
pages = "192--201",
booktitle = "Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences",

}

TY - CHAP

T1 - Development of high-performance cooling devices for space application by using flow boiling in narrow channels

AU - Miura, Shinichi

AU - Inada, Yukihiro

AU - Yasuhisa, Shinmoto

AU - Ohta, Haruhiko

PY - 2009/1/1

Y1 - 2009/1/1

N2 - Heat generation density from semiconductor devices has been increasing with the rapid development of electronic technology. The cooling system using boiling two-phase phenomena has attracted much attention because of its high heat removal potential. To develop compact and high-performance cooling systems, we conducted experiments on the increase of critical heat flux (CHF) for flow boiling in narrow channels by improved liquid supply. A large surface of 150 mm in heated length and 30 mm in width with grooves of an apex angle of 90°, 0.5-mm depth, and 1 mm in pitch was employed. A structure of narrow heated channel between parallel plates with an unheated auxiliary channel was devised and tested by using water for different combinations of gap sizes and volumetric flow rates, where inlet of the main heated channel and the outlet of auxiliary unheated channel were closed to prevent the flow instability observed frequently at low flow rate for parallel two channels. For the total volumetric flow rate more than 4.5 × 10-5 m3/s, higher values of CHF large than 2 × 106 W/m2 were obtained for gap size of 2 mm. For gap sizes of 2 mm and 5 mm at high volumetric flow rate larger than 6.0 × 10-5 m3/s, or mass velocity based on the cross section are of main heated channel 958.1 kg/m2s and 383.2 kg/m2 s, respectively, the extension of dry patches was observed at the upstream location of the main heated channel resulting in burnout not at the downstream but at the upstream. By the increase in total volumetric flow rate, the pressure drop increased because of increasing in the flow rate passing through the sintered metal porous plates connecting both channels. The values of pressure drop for gap size of 2 mm were higher than that for gap size of 5 mm. When the performance of the cooling system was evaluated on the basis of pump power, ignoring its variation in the efficiency with volumetric flow rate, that is, the power defined as the product of the pressure drop and the total volumetric flow rate, higher values of CHF were obtained for gap size of 5 mm as far as the same pump power was concerned.

AB - Heat generation density from semiconductor devices has been increasing with the rapid development of electronic technology. The cooling system using boiling two-phase phenomena has attracted much attention because of its high heat removal potential. To develop compact and high-performance cooling systems, we conducted experiments on the increase of critical heat flux (CHF) for flow boiling in narrow channels by improved liquid supply. A large surface of 150 mm in heated length and 30 mm in width with grooves of an apex angle of 90°, 0.5-mm depth, and 1 mm in pitch was employed. A structure of narrow heated channel between parallel plates with an unheated auxiliary channel was devised and tested by using water for different combinations of gap sizes and volumetric flow rates, where inlet of the main heated channel and the outlet of auxiliary unheated channel were closed to prevent the flow instability observed frequently at low flow rate for parallel two channels. For the total volumetric flow rate more than 4.5 × 10-5 m3/s, higher values of CHF large than 2 × 106 W/m2 were obtained for gap size of 2 mm. For gap sizes of 2 mm and 5 mm at high volumetric flow rate larger than 6.0 × 10-5 m3/s, or mass velocity based on the cross section are of main heated channel 958.1 kg/m2s and 383.2 kg/m2 s, respectively, the extension of dry patches was observed at the upstream location of the main heated channel resulting in burnout not at the downstream but at the upstream. By the increase in total volumetric flow rate, the pressure drop increased because of increasing in the flow rate passing through the sintered metal porous plates connecting both channels. The values of pressure drop for gap size of 2 mm were higher than that for gap size of 5 mm. When the performance of the cooling system was evaluated on the basis of pump power, ignoring its variation in the efficiency with volumetric flow rate, that is, the power defined as the product of the pressure drop and the total volumetric flow rate, higher values of CHF were obtained for gap size of 5 mm as far as the same pump power was concerned.

UR - http://www.scopus.com/inward/record.url?scp=65249174059&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=65249174059&partnerID=8YFLogxK

U2 - 10.1111/j.1749-6632.2009.04082.x

DO - 10.1111/j.1749-6632.2009.04082.x

M3 - Chapter

SN - 9781573317122

T3 - Annals of the New York Academy of Sciences

SP - 192

EP - 201

BT - Interdisciplinary Transport Phenomena Fluid, Thermal, Biological, Materials, and Space Sciences

PB - Blackwell Publishing Inc.

ER -