Development of monitor system for parallel-type superconducting level sensor for liquid hydrogen

Naoki Tanaka, Kazuhiro Kajikawa, Hidetoshi Oguro, Makoto Sugino, Tsutomu Nakanishi, Itsuo Aoki

研究成果: ジャーナルへの寄稿会議記事査読

1 被引用数 (Scopus)

抄録

We develop a monitor system to control a parallel-type superconducting (SC) level sensor and to indicate the level of liquid hydrogen in a container. The parallel-type level sensor is composed of an MgB2 wire and non-SC wire, which are vertically located in parallel and electrically connected in series. We assemble the monitor unit using a power supply, central processing unit (CPU), analog-to-digital (AD)/digital-to-analog (DA) converter, touch panel, voltage dividers and isolators. The terminal voltages of the MgB2 wire and non-SC wire with a constant current produced by the power supply are stored in the memory of CPU through the isolators, voltage dividers and AD converter. The liquid level is calculated in the CPU according to a pre-written program code. The obtained result is displayed on the touch panel and also output externally via the DA converter and isolator. Furthermore, the normal operation of the developed monitor system is validated using dummy voltages from an oscillator.

本文言語英語
論文番号012041
ジャーナルJournal of Physics: Conference Series
1293
1
DOI
出版ステータス出版済み - 10月 15 2019
イベント31st International Symposium on Superconductivity, ISS 2018 - Tsukuba, Ibaraki, 日本
継続期間: 12月 12 201812月 14 2018

!!!All Science Journal Classification (ASJC) codes

  • 物理学および天文学(全般)

フィンガープリント

「Development of monitor system for parallel-type superconducting level sensor for liquid hydrogen」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル