Development of peening technique using recirculating shot accelerated by water jet

A. Naito, Osamu Takakuwa, H. Soyama

研究成果: Contribution to journalArticle査読

19 被引用数 (Scopus)

抄録

The present paper demonstrates the development of a peening technique using recirculating shot accelerated by a water jet that can be used as a risk free treatment in power and chemical plants. Although it is important to increase the reliability of structural materials used in large scale structures, such as power and chemical plants, it is hazardous to treat these structures by general shot peening (SP) techniques because of the risk of sparks and dust explosions. In the present study, an SP technique using a water jet to accelerate shot has been developed, and the conditions under which it is used have been optimised in terms of nozzle geometry, standoff distance and amount of shot. In order to demonstrate the effect of SP, austenitic stainless steel Japan Industries Standards SUS316L was peened and evaluated in terms of its residual stress, fatigue strength and resistance to stress corrosion cracking.

本文言語英語
ページ(範囲)234-239
ページ数6
ジャーナルMaterials Science and Technology
28
2
DOI
出版ステータス出版済み - 1 16 2012
外部発表はい

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Development of peening technique using recirculating shot accelerated by water jet」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル