Development of pressure cell for specific heat measurement at low temperature and high Magnetic field

Tatsuya Kawae, K. Yaita, Y. Yoshida, Yuji Inagaki, M. Ohashi, G. Oomi, K. Matsubayashi, T. Matsumoto, Y. Uwatoko

研究成果: ジャーナルへの寄稿学術誌査読

2 被引用数 (Scopus)

抄録

We report the performance of Ag-Pd-Cu alloy as the material of a pressure cell to carry out specific heat measurements at low temperatures and high magnetic fields. The Ag-Pd-Cu alloy is advantageous to reduce the background due to the nuclear specific heat in the pressure cell growing at low temperatures and high magnetic fields. We prepared 70-20-10 alloy composed of 70 mass % of Ag, 20 mass % of Pd, and 10 mass % of Cu. The maximum hardness over 100 HRB (Rockwell-B scale) is achieved by the heat treatment. The magnetization and susceptibility results show that the alloy includes a small amount of magnetic ions, whose concentration is smaller than that in the Be-Cu alloy. We confirm that the specific heat of a piston cylinder cell made of the 70-20-10 alloy increases smoothly from 0.2 to 9 K and the nuclear specific heat decreases drastically in magnetic field compared to that expected in the Be-Cu alloy. The pressure value in the cell at low temperature increases almost linearly up to P=0.4 GPa, which is nearly the limit of the inner piston made of the 70-20-10 alloy, with increasing of the load applied at room temperature.

本文言語英語
論文番号025102
ジャーナルReview of Scientific Instruments
80
2
DOI
出版ステータス出版済み - 3月 9 2009

!!!All Science Journal Classification (ASJC) codes

  • 器械工学

フィンガープリント

「Development of pressure cell for specific heat measurement at low temperature and high Magnetic field」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル