Development of REBCO coated conductors by TFA-MOD method with high properties in magnetic fields

K. Kimura, R. Hironaga, T. Nakamura, Y. Takahashi, T. Koizumi, T. Hasegawa, K. Higashikawa, M. Inoue, T. Kiss, M. Yoshizumi, T. Izumi, Y. Shiohara

研究成果: ジャーナルへの寄稿記事

9 引用 (Scopus)

抜粋

With technological advance of the REBaCuO (RE: Rare Earth elements, REBCO) coated conductors (CC), development of the superconducting applications for its practical use has been carried out recently in various fields. In addition, improvement of the magnetic properties of REBCO CCs makes superconducting devices feasible in the liquid nitrogen. The higher Ic values are required in high magnetic fields by the viewpoint of the requirement in conjunction with the superconducting CCs. Therefore the improvement of the Ic values in the magnetic fields is one of the most important problems to apply them to a device (e.g., NMR, MRI, others). In this work, we investigated the fabrication processing to improve the in-field properties of the YGdBaCuO (YGdBCO) CCs by introduction of artificial pinning centers (APCs). The TFA-MOD method using the batch type furnace for the conversion reaction as a cost effective process to fabricate REBCO CCs was improved by adopting the interim heat treatment during the ramp step of the conversion reaction. The improvement of the properties by the improved process was remarkable and the advanced CCs were named as nPAD-YBCO. A 124 m-long nPAD-YBCO consisted of YGdBCO CC with BZO nano particles was successfully fabricated, exhibiting the Icmin > 50 A/cm-w @77 K, 3 T (Ic: Critical current) throughout the conductor. Analyzing the characteristics of the conductor, the BZO particles introduced into the YGdBCO layer worked as effective APCs in wide ranges of temperature and magnetic fields.

元の言語英語
記事番号6985571
ジャーナルIEEE Transactions on Applied Superconductivity
25
発行部数3
DOI
出版物ステータス出版済み - 6 1 2015

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント Development of REBCO coated conductors by TFA-MOD method with high properties in magnetic fields' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Kimura, K., Hironaga, R., Nakamura, T., Takahashi, Y., Koizumi, T., Hasegawa, T., Higashikawa, K., Inoue, M., Kiss, T., Yoshizumi, M., Izumi, T., & Shiohara, Y. (2015). Development of REBCO coated conductors by TFA-MOD method with high properties in magnetic fields. IEEE Transactions on Applied Superconductivity, 25(3), [6985571]. https://doi.org/10.1109/TASC.2014.2380773