Development of severe torsion straining process for rapid continuous grain refinement

Katsuaki Nakamura, Koji Neishi, Kenji Kaneko, Michihiko Nakagaki, Zenji Horita

研究成果: Contribution to journalArticle

45 引用 (Scopus)

抜粋

This study presents a rapid continuous process for grain refinement in metallic materials through severe plastic deformation (SPD). The principle is described and the process is applied to an Al-5056 alloy and an S45C carbon steel. The new process, designated in this study the severe torsion straining process (STSP), consists of producing a local heated zone in a rod and introducing torsion strain into the zone by rotating one end with the other. The process is continuous because the straining is achieved while the rod is moved so that the heated zone is shifted along the rod. The STSP does not require the use of any die and can be applicable to pipes or wires. Fine-grained structures produced with the STSP are confirmed using optical microscopy and transmission electron microscopy. Tensile properties are measured and compared with the unstrained fully annealed samples. The feasibility of the STSP is discussed with respect to the rotation speed and moving speed.

元の言語英語
ページ(範囲)3338-3342
ページ数5
ジャーナルMaterials Transactions
45
発行部数12
DOI
出版物ステータス出版済み - 12 1 2004

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Development of severe torsion straining process for rapid continuous grain refinement' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用