Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure

Fujio Tsumori, Hidenori Kawanishi, Kentaro Kudo, Toshiko Osada, Hideshi Miura

研究成果: ジャーナルへの寄稿記事

4 引用 (Scopus)

抄録

In this paper, we report on a new system of three-dimensional (3D) printing for a magnetic elastomer that contains magnetic particles. Not only can we fabricate a three-dimensional structure, but we can also control the magnetically anisotropic property of each position in the structure using the present technique. Our new system employed photocurable poly(dimethylsiloxane) (PDMS) as the base material so that a method similar to a conventional 3D printing process with photolithography can be used. A magnetic powder was mixed with photocurable PDMS, and particle chain clusters were obtained by applying a magnetic field during the curing process. These chain clusters provide an anisotropic property in each part of the printed structure. We show some results of preliminary experiments and 3D printed samples in this paper. If the fabricated structure was placed under an applied magnetic field, each chain cluster will cause the rotational moment to be along the magnetic flux line, which can deform a soft matrix body. This deformation can be used as a magnetic actuator for the structure. Variable deformable structures could be developed using the present method.

元の言語英語
記事番号06GP18
ジャーナルJapanese Journal of Applied Physics
55
発行部数6
DOI
出版物ステータス出版済み - 6 2016

Fingerprint

3D printers
Magnetic anisotropy
elastomers
Polydimethylsiloxane
Elastomers
printing
Printing
Magnetic actuators
Magnetic fields
anisotropy
Photolithography
Magnetic flux
Curing
photolithography
curing
magnetic fields
Powders
magnetic flux
actuators
moments

All Science Journal Classification (ASJC) codes

  • Engineering(all)
  • Physics and Astronomy(all)

これを引用

Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure. / Tsumori, Fujio; Kawanishi, Hidenori; Kudo, Kentaro; Osada, Toshiko; Miura, Hideshi.

:: Japanese Journal of Applied Physics, 巻 55, 番号 6, 06GP18, 06.2016.

研究成果: ジャーナルへの寄稿記事

@article{9864683e99d84866a27067d7f7007fd4,
title = "Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure",
abstract = "In this paper, we report on a new system of three-dimensional (3D) printing for a magnetic elastomer that contains magnetic particles. Not only can we fabricate a three-dimensional structure, but we can also control the magnetically anisotropic property of each position in the structure using the present technique. Our new system employed photocurable poly(dimethylsiloxane) (PDMS) as the base material so that a method similar to a conventional 3D printing process with photolithography can be used. A magnetic powder was mixed with photocurable PDMS, and particle chain clusters were obtained by applying a magnetic field during the curing process. These chain clusters provide an anisotropic property in each part of the printed structure. We show some results of preliminary experiments and 3D printed samples in this paper. If the fabricated structure was placed under an applied magnetic field, each chain cluster will cause the rotational moment to be along the magnetic flux line, which can deform a soft matrix body. This deformation can be used as a magnetic actuator for the structure. Variable deformable structures could be developed using the present method.",
author = "Fujio Tsumori and Hidenori Kawanishi and Kentaro Kudo and Toshiko Osada and Hideshi Miura",
year = "2016",
month = "6",
doi = "10.7567/JJAP.55.06GP18",
language = "English",
volume = "55",
journal = "Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes",
issn = "0021-4922",
publisher = "Institute of Physics",
number = "6",

}

TY - JOUR

T1 - Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure

AU - Tsumori, Fujio

AU - Kawanishi, Hidenori

AU - Kudo, Kentaro

AU - Osada, Toshiko

AU - Miura, Hideshi

PY - 2016/6

Y1 - 2016/6

N2 - In this paper, we report on a new system of three-dimensional (3D) printing for a magnetic elastomer that contains magnetic particles. Not only can we fabricate a three-dimensional structure, but we can also control the magnetically anisotropic property of each position in the structure using the present technique. Our new system employed photocurable poly(dimethylsiloxane) (PDMS) as the base material so that a method similar to a conventional 3D printing process with photolithography can be used. A magnetic powder was mixed with photocurable PDMS, and particle chain clusters were obtained by applying a magnetic field during the curing process. These chain clusters provide an anisotropic property in each part of the printed structure. We show some results of preliminary experiments and 3D printed samples in this paper. If the fabricated structure was placed under an applied magnetic field, each chain cluster will cause the rotational moment to be along the magnetic flux line, which can deform a soft matrix body. This deformation can be used as a magnetic actuator for the structure. Variable deformable structures could be developed using the present method.

AB - In this paper, we report on a new system of three-dimensional (3D) printing for a magnetic elastomer that contains magnetic particles. Not only can we fabricate a three-dimensional structure, but we can also control the magnetically anisotropic property of each position in the structure using the present technique. Our new system employed photocurable poly(dimethylsiloxane) (PDMS) as the base material so that a method similar to a conventional 3D printing process with photolithography can be used. A magnetic powder was mixed with photocurable PDMS, and particle chain clusters were obtained by applying a magnetic field during the curing process. These chain clusters provide an anisotropic property in each part of the printed structure. We show some results of preliminary experiments and 3D printed samples in this paper. If the fabricated structure was placed under an applied magnetic field, each chain cluster will cause the rotational moment to be along the magnetic flux line, which can deform a soft matrix body. This deformation can be used as a magnetic actuator for the structure. Variable deformable structures could be developed using the present method.

UR - http://www.scopus.com/inward/record.url?scp=84974577316&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84974577316&partnerID=8YFLogxK

U2 - 10.7567/JJAP.55.06GP18

DO - 10.7567/JJAP.55.06GP18

M3 - Article

AN - SCOPUS:84974577316

VL - 55

JO - Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes

JF - Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes

SN - 0021-4922

IS - 6

M1 - 06GP18

ER -