Development of YS 500MPa class TMCP steel plates for offshore structures

Akihiko Kojima, Akihito Kiyose, Yoshio Terada, Atsuhiko Yoshie, Ryuji Uemori, Shuji Aihara, Shiroh Imai, Yuzuru Yoshida, Toshihiko Adachi, Kazuaki Tanaka, Takao Nakashima

研究成果: 会議への寄与タイプ論文

4 引用 (Scopus)

抄録

New steel manufacturing technology has been developed to attain excellent crack tip opening displacement (CTOD) properties in a heat affected zone (HAZ) as well as yield strength (YS) of 500MPa in base metal. In the new steels, the HAZ microstructure near a weld fusion line is markedly refined by utilizing not only the formation of intragranular ferrite (IGF) but the strong retardation of austenite (here in after " γ ") grain growth. The IGF grows radially from oxides in the same way as in titanium-oxide bearing steels (TiO steels). The γ grain growth retardation is due to the pinning effect by fine particles including ultrafine oxides. Since these oxides dispersed in the steels are chemically stable even near the fusion line, the microstructure control is possible and the HAZ microstructure can be remarkably refined. Based on the new technology, YS 500MPa class thermomechanical control process (TMCP) steel plates with a low carbon equivalent and a 63.5mm thickness for offshore structures have been manufactured and tested. The steel plates have satisfied the required strength and low-temperature toughness of the base metal. They have also exhibited excellent CTOD properties and Charpy impact properties of joints welded by flux cored arc welding (FCAW) with 0.7kJ/mm and welded by submerged arc welding (SAW) with 3.5kJ/mm, as well as good weldability. The newly developed YS 460MPa and YS 500MPa class TMCP steel plates are being mass produced for offshore structures.

元の言語英語
ページ167-175
ページ数9
出版物ステータス出版済み - 12 1 2001
外部発表Yes
イベント20th International Conference on Offshore Mechanics and Arctic Engineering; Materials - Rio de Janeiro, ブラジル
継続期間: 6 3 20016 8 2001

その他

その他20th International Conference on Offshore Mechanics and Arctic Engineering; Materials
ブラジル
Rio de Janeiro
期間6/3/016/8/01

Fingerprint

Offshore structures
Yield stress
Steel
Heat affected zone
Grain growth
Crack tips
Microstructure
Oxides
Ferrite
Welds
Bearings (structural)
Fusion reactions
Flux-cored arc welding (FCAW)
Submerged arc welding
Weldability
Titanium oxides
Metals
Austenite
Toughness
Carbon

All Science Journal Classification (ASJC) codes

  • Ocean Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering

これを引用

Kojima, A., Kiyose, A., Terada, Y., Yoshie, A., Uemori, R., Aihara, S., ... Nakashima, T. (2001). Development of YS 500MPa class TMCP steel plates for offshore structures. 167-175. 論文発表場所 20th International Conference on Offshore Mechanics and Arctic Engineering; Materials, Rio de Janeiro, ブラジル.

Development of YS 500MPa class TMCP steel plates for offshore structures. / Kojima, Akihiko; Kiyose, Akihito; Terada, Yoshio; Yoshie, Atsuhiko; Uemori, Ryuji; Aihara, Shuji; Imai, Shiroh; Yoshida, Yuzuru; Adachi, Toshihiko; Tanaka, Kazuaki; Nakashima, Takao.

2001. 167-175 論文発表場所 20th International Conference on Offshore Mechanics and Arctic Engineering; Materials, Rio de Janeiro, ブラジル.

研究成果: 会議への寄与タイプ論文

Kojima, A, Kiyose, A, Terada, Y, Yoshie, A, Uemori, R, Aihara, S, Imai, S, Yoshida, Y, Adachi, T, Tanaka, K & Nakashima, T 2001, 'Development of YS 500MPa class TMCP steel plates for offshore structures' 論文発表場所 20th International Conference on Offshore Mechanics and Arctic Engineering; Materials, Rio de Janeiro, ブラジル, 6/3/01 - 6/8/01, pp. 167-175.
Kojima A, Kiyose A, Terada Y, Yoshie A, Uemori R, Aihara S その他. Development of YS 500MPa class TMCP steel plates for offshore structures. 2001. 論文発表場所 20th International Conference on Offshore Mechanics and Arctic Engineering; Materials, Rio de Janeiro, ブラジル.
Kojima, Akihiko ; Kiyose, Akihito ; Terada, Yoshio ; Yoshie, Atsuhiko ; Uemori, Ryuji ; Aihara, Shuji ; Imai, Shiroh ; Yoshida, Yuzuru ; Adachi, Toshihiko ; Tanaka, Kazuaki ; Nakashima, Takao. / Development of YS 500MPa class TMCP steel plates for offshore structures. 論文発表場所 20th International Conference on Offshore Mechanics and Arctic Engineering; Materials, Rio de Janeiro, ブラジル.9 p.
@conference{4b7af142e16442dc8b6323eb405e2e06,
title = "Development of YS 500MPa class TMCP steel plates for offshore structures",
abstract = "New steel manufacturing technology has been developed to attain excellent crack tip opening displacement (CTOD) properties in a heat affected zone (HAZ) as well as yield strength (YS) of 500MPa in base metal. In the new steels, the HAZ microstructure near a weld fusion line is markedly refined by utilizing not only the formation of intragranular ferrite (IGF) but the strong retardation of austenite (here in after {"} γ {"}) grain growth. The IGF grows radially from oxides in the same way as in titanium-oxide bearing steels (TiO steels). The γ grain growth retardation is due to the pinning effect by fine particles including ultrafine oxides. Since these oxides dispersed in the steels are chemically stable even near the fusion line, the microstructure control is possible and the HAZ microstructure can be remarkably refined. Based on the new technology, YS 500MPa class thermomechanical control process (TMCP) steel plates with a low carbon equivalent and a 63.5mm thickness for offshore structures have been manufactured and tested. The steel plates have satisfied the required strength and low-temperature toughness of the base metal. They have also exhibited excellent CTOD properties and Charpy impact properties of joints welded by flux cored arc welding (FCAW) with 0.7kJ/mm and welded by submerged arc welding (SAW) with 3.5kJ/mm, as well as good weldability. The newly developed YS 460MPa and YS 500MPa class TMCP steel plates are being mass produced for offshore structures.",
author = "Akihiko Kojima and Akihito Kiyose and Yoshio Terada and Atsuhiko Yoshie and Ryuji Uemori and Shuji Aihara and Shiroh Imai and Yuzuru Yoshida and Toshihiko Adachi and Kazuaki Tanaka and Takao Nakashima",
year = "2001",
month = "12",
day = "1",
language = "English",
pages = "167--175",
note = "20th International Conference on Offshore Mechanics and Arctic Engineering; Materials ; Conference date: 03-06-2001 Through 08-06-2001",

}

TY - CONF

T1 - Development of YS 500MPa class TMCP steel plates for offshore structures

AU - Kojima, Akihiko

AU - Kiyose, Akihito

AU - Terada, Yoshio

AU - Yoshie, Atsuhiko

AU - Uemori, Ryuji

AU - Aihara, Shuji

AU - Imai, Shiroh

AU - Yoshida, Yuzuru

AU - Adachi, Toshihiko

AU - Tanaka, Kazuaki

AU - Nakashima, Takao

PY - 2001/12/1

Y1 - 2001/12/1

N2 - New steel manufacturing technology has been developed to attain excellent crack tip opening displacement (CTOD) properties in a heat affected zone (HAZ) as well as yield strength (YS) of 500MPa in base metal. In the new steels, the HAZ microstructure near a weld fusion line is markedly refined by utilizing not only the formation of intragranular ferrite (IGF) but the strong retardation of austenite (here in after " γ ") grain growth. The IGF grows radially from oxides in the same way as in titanium-oxide bearing steels (TiO steels). The γ grain growth retardation is due to the pinning effect by fine particles including ultrafine oxides. Since these oxides dispersed in the steels are chemically stable even near the fusion line, the microstructure control is possible and the HAZ microstructure can be remarkably refined. Based on the new technology, YS 500MPa class thermomechanical control process (TMCP) steel plates with a low carbon equivalent and a 63.5mm thickness for offshore structures have been manufactured and tested. The steel plates have satisfied the required strength and low-temperature toughness of the base metal. They have also exhibited excellent CTOD properties and Charpy impact properties of joints welded by flux cored arc welding (FCAW) with 0.7kJ/mm and welded by submerged arc welding (SAW) with 3.5kJ/mm, as well as good weldability. The newly developed YS 460MPa and YS 500MPa class TMCP steel plates are being mass produced for offshore structures.

AB - New steel manufacturing technology has been developed to attain excellent crack tip opening displacement (CTOD) properties in a heat affected zone (HAZ) as well as yield strength (YS) of 500MPa in base metal. In the new steels, the HAZ microstructure near a weld fusion line is markedly refined by utilizing not only the formation of intragranular ferrite (IGF) but the strong retardation of austenite (here in after " γ ") grain growth. The IGF grows radially from oxides in the same way as in titanium-oxide bearing steels (TiO steels). The γ grain growth retardation is due to the pinning effect by fine particles including ultrafine oxides. Since these oxides dispersed in the steels are chemically stable even near the fusion line, the microstructure control is possible and the HAZ microstructure can be remarkably refined. Based on the new technology, YS 500MPa class thermomechanical control process (TMCP) steel plates with a low carbon equivalent and a 63.5mm thickness for offshore structures have been manufactured and tested. The steel plates have satisfied the required strength and low-temperature toughness of the base metal. They have also exhibited excellent CTOD properties and Charpy impact properties of joints welded by flux cored arc welding (FCAW) with 0.7kJ/mm and welded by submerged arc welding (SAW) with 3.5kJ/mm, as well as good weldability. The newly developed YS 460MPa and YS 500MPa class TMCP steel plates are being mass produced for offshore structures.

UR - http://www.scopus.com/inward/record.url?scp=0344741328&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0344741328&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0344741328

SP - 167

EP - 175

ER -