反射超音波パルスを用いたボルトの緩み診断

門脇 廉, 池田 翔輝, 井上 卓見

研究成果: Contribution to journalArticle査読

抄録

<p>Diagnosis of the bolt loosening is important in the industrial field and the medical field such as dental implants. This study proposes a new non-destructive testing method for the bolt loosening using ultrasonic pulse projected to the side of the bolt. This method focuses on the reflected pulse from the screw thread and its instantaneous frequency. A basic experiment with aluminum block and a stainless steel bolt shows that the tightening torque of the bolt can be evaluated via the instantaneous frequency of the reflected pulse from the screw thread. Decreasing the tightening torque, the instantaneous frequency reaches a maximal value earlier. We tried to verify the mechanism of the proposed method through an identification of the transmission paths and a numerical simulation. Real contact area on the load flank decreases, and the reflectance on the load flank changes when the tightening torque decreases. The analytical study shows that the change of the reflectance affects the received pulse. Especially, a peak time of the instantaneous frequency of the received pulse varies owing to the amplitude ratio of the reflected pulses from the load flank to the pulses reflected from the other contact surfaces. These analytical results follow the experimental results. Therefore, observing the peak time of the instantaneous frequency of the received ultrasonic pulse, we can obtain the reasonable index to diagnose the bolt loosening.</p>
寄稿の翻訳タイトルDiagnosis of bolt loosening using reflected ultrasonic pulse
本文言語日本語
ページ(範囲)18-00202-18-00202
ジャーナル日本機械学会論文集
85
871
DOI
出版ステータス出版済み - 2019

フィンガープリント

「反射超音波パルスを用いたボルトの緩み診断」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル