Difference in local deformation and ductile fracture behaviors between hard VC and soft Cu particle dispersion ferritic steels

Toshihiro Tsuchiyma, Mafuyu Koga, Izumi Shimoji, Shu Hirabayashi, Takuro Masumura

研究成果: ジャーナルへの寄稿記事

抄録

Synopsis: Particle dispersion ferritic steels with hard VC carbide particles and that with soft Cu particles were tensile-tested for investigating the effect of particle nature (hard or soft) on plastic deformation and ductile fracture behaviors. The Cu dispersion steel exhibited a significantly larger necking deformation than the VC dispersion steel, which is due to less frequent void formation in the Cu dispersion steel. Digital image correlation (DIC) analysis for tensile-deformed specimens revealed that the plastic strain was concentrated around the VC particles in the VC steel, while that was distributed within ferrite matrix away from Cu particles in the Cu steel. As a result of high-magnification observation for the void formation in each steel, it was found that nano-sized voids were nucleated at the interface of the rigid VC particles, while they were never formed at the plastically-elongated Cu particles. Reduced stress/strain concentration at the particle interface is inferred to be occurred by the plastic deformation of soft Cu particles during the tensile deformation. This leads to the retardation of ductile fracture to the higher stress/strain regime and the superior local ductility in the Cu steel.

元の言語英語
ページ(範囲)60-67
ページ数8
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
105
発行部数2
DOI
出版物ステータス出版済み - 2 1 2019

Fingerprint

Ductile fracture
Steel
Ferritic steel
steels
Plastic deformation
voids
plastic deformation
tensile deformation
Ferrite
Carbides
Ductility
magnification
ductility
carbides
ferrites
plastics

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

これを引用

Difference in local deformation and ductile fracture behaviors between hard VC and soft Cu particle dispersion ferritic steels. / Tsuchiyma, Toshihiro; Koga, Mafuyu; Shimoji, Izumi; Hirabayashi, Shu; Masumura, Takuro.

:: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 巻 105, 番号 2, 01.02.2019, p. 60-67.

研究成果: ジャーナルへの寄稿記事

@article{b97fccf6f2dd4639857ec832712315c7,
title = "Difference in local deformation and ductile fracture behaviors between hard VC and soft Cu particle dispersion ferritic steels",
abstract = "Synopsis: Particle dispersion ferritic steels with hard VC carbide particles and that with soft Cu particles were tensile-tested for investigating the effect of particle nature (hard or soft) on plastic deformation and ductile fracture behaviors. The Cu dispersion steel exhibited a significantly larger necking deformation than the VC dispersion steel, which is due to less frequent void formation in the Cu dispersion steel. Digital image correlation (DIC) analysis for tensile-deformed specimens revealed that the plastic strain was concentrated around the VC particles in the VC steel, while that was distributed within ferrite matrix away from Cu particles in the Cu steel. As a result of high-magnification observation for the void formation in each steel, it was found that nano-sized voids were nucleated at the interface of the rigid VC particles, while they were never formed at the plastically-elongated Cu particles. Reduced stress/strain concentration at the particle interface is inferred to be occurred by the plastic deformation of soft Cu particles during the tensile deformation. This leads to the retardation of ductile fracture to the higher stress/strain regime and the superior local ductility in the Cu steel.",
author = "Toshihiro Tsuchiyma and Mafuyu Koga and Izumi Shimoji and Shu Hirabayashi and Takuro Masumura",
year = "2019",
month = "2",
day = "1",
doi = "10.2355/tetsutohagane.TETSU-2018-088",
language = "English",
volume = "105",
pages = "60--67",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "2",

}

TY - JOUR

T1 - Difference in local deformation and ductile fracture behaviors between hard VC and soft Cu particle dispersion ferritic steels

AU - Tsuchiyma, Toshihiro

AU - Koga, Mafuyu

AU - Shimoji, Izumi

AU - Hirabayashi, Shu

AU - Masumura, Takuro

PY - 2019/2/1

Y1 - 2019/2/1

N2 - Synopsis: Particle dispersion ferritic steels with hard VC carbide particles and that with soft Cu particles were tensile-tested for investigating the effect of particle nature (hard or soft) on plastic deformation and ductile fracture behaviors. The Cu dispersion steel exhibited a significantly larger necking deformation than the VC dispersion steel, which is due to less frequent void formation in the Cu dispersion steel. Digital image correlation (DIC) analysis for tensile-deformed specimens revealed that the plastic strain was concentrated around the VC particles in the VC steel, while that was distributed within ferrite matrix away from Cu particles in the Cu steel. As a result of high-magnification observation for the void formation in each steel, it was found that nano-sized voids were nucleated at the interface of the rigid VC particles, while they were never formed at the plastically-elongated Cu particles. Reduced stress/strain concentration at the particle interface is inferred to be occurred by the plastic deformation of soft Cu particles during the tensile deformation. This leads to the retardation of ductile fracture to the higher stress/strain regime and the superior local ductility in the Cu steel.

AB - Synopsis: Particle dispersion ferritic steels with hard VC carbide particles and that with soft Cu particles were tensile-tested for investigating the effect of particle nature (hard or soft) on plastic deformation and ductile fracture behaviors. The Cu dispersion steel exhibited a significantly larger necking deformation than the VC dispersion steel, which is due to less frequent void formation in the Cu dispersion steel. Digital image correlation (DIC) analysis for tensile-deformed specimens revealed that the plastic strain was concentrated around the VC particles in the VC steel, while that was distributed within ferrite matrix away from Cu particles in the Cu steel. As a result of high-magnification observation for the void formation in each steel, it was found that nano-sized voids were nucleated at the interface of the rigid VC particles, while they were never formed at the plastically-elongated Cu particles. Reduced stress/strain concentration at the particle interface is inferred to be occurred by the plastic deformation of soft Cu particles during the tensile deformation. This leads to the retardation of ductile fracture to the higher stress/strain regime and the superior local ductility in the Cu steel.

UR - http://www.scopus.com/inward/record.url?scp=85062542878&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85062542878&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane.TETSU-2018-088

DO - 10.2355/tetsutohagane.TETSU-2018-088

M3 - Article

VL - 105

SP - 60

EP - 67

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 2

ER -