Dynamic Simulation Software for Prediction of Hydrogen Temperature and Pressure during Fueling Process

Taichi Kuroki, Kiyoshi Handa, Masanori Monde, Shigehiro Yamaguchi, Kane'I Shinzato, Yasuyuki Takata, Naoya Sakoda

研究成果: ジャーナルへの寄稿Conference article

抄録

In this study, in order to relax the pre-cooling regulations at hydrogen fueling stations, we develop a software algorithm to simulate an actual hydrogen fueling process to Fuel Cell Vehicle (FCV) tanks. The simulation model in the software consists of the same filling equipment found at an actual hydrogen fueling station. Additionally, the same supply conditions (pre-cooling temperature, pressure and mass flow rate) as at a hydrogen fueling station were set to the simulation model. Based on the supply conditions, the software simulates the temperature and pressure of hydrogen in each part of filling equipment. In order to verify the accuracy of the software, we compare the temperature and pressure simulated at each stage of the filling process with experimental data. We show that by using the software it is possible to accurately calculate the hydrogen temperature and pressure at each point during the fueling process. Subsequently, we carry out a sensitive analysis of the filling equipment with large heat capacity, the initial temperature in the FCV tank and the pre-cooling temperature, and then propose an effective step to relax the regulation regarding the pre-cooling temperature. KeywordsFilling equipment, Hydrogen fueling station, Hydrogen temperature, Hydrogen pressure, Pre-cooling temperature.

元の言語英語
ジャーナルSAE Technical Papers
2018-April
DOI
出版物ステータス出版済み - 1 1 2018
イベント2018 SAE World Congress Experience, WCX 2018 - Detroit, 米国
継続期間: 4 10 20184 12 2018

Fingerprint

Fueling
Hydrogen
Computer simulation
Cooling
Temperature
Fuel cells
Specific heat
Flow rate

All Science Journal Classification (ASJC) codes

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

これを引用

Dynamic Simulation Software for Prediction of Hydrogen Temperature and Pressure during Fueling Process. / Kuroki, Taichi; Handa, Kiyoshi; Monde, Masanori; Yamaguchi, Shigehiro; Shinzato, Kane'I; Takata, Yasuyuki; Sakoda, Naoya.

:: SAE Technical Papers, 巻 2018-April, 01.01.2018.

研究成果: ジャーナルへの寄稿Conference article

Kuroki, Taichi ; Handa, Kiyoshi ; Monde, Masanori ; Yamaguchi, Shigehiro ; Shinzato, Kane'I ; Takata, Yasuyuki ; Sakoda, Naoya. / Dynamic Simulation Software for Prediction of Hydrogen Temperature and Pressure during Fueling Process. :: SAE Technical Papers. 2018 ; 巻 2018-April.
@article{efe351ba16014e7a8f72268e0c443676,
title = "Dynamic Simulation Software for Prediction of Hydrogen Temperature and Pressure during Fueling Process",
abstract = "In this study, in order to relax the pre-cooling regulations at hydrogen fueling stations, we develop a software algorithm to simulate an actual hydrogen fueling process to Fuel Cell Vehicle (FCV) tanks. The simulation model in the software consists of the same filling equipment found at an actual hydrogen fueling station. Additionally, the same supply conditions (pre-cooling temperature, pressure and mass flow rate) as at a hydrogen fueling station were set to the simulation model. Based on the supply conditions, the software simulates the temperature and pressure of hydrogen in each part of filling equipment. In order to verify the accuracy of the software, we compare the temperature and pressure simulated at each stage of the filling process with experimental data. We show that by using the software it is possible to accurately calculate the hydrogen temperature and pressure at each point during the fueling process. Subsequently, we carry out a sensitive analysis of the filling equipment with large heat capacity, the initial temperature in the FCV tank and the pre-cooling temperature, and then propose an effective step to relax the regulation regarding the pre-cooling temperature. KeywordsFilling equipment, Hydrogen fueling station, Hydrogen temperature, Hydrogen pressure, Pre-cooling temperature.",
author = "Taichi Kuroki and Kiyoshi Handa and Masanori Monde and Shigehiro Yamaguchi and Kane'I Shinzato and Yasuyuki Takata and Naoya Sakoda",
year = "2018",
month = "1",
day = "1",
doi = "10.4271/2018-01-1304",
language = "English",
volume = "2018-April",
journal = "SAE Technical Papers",
issn = "0148-7191",
publisher = "SAE International",

}

TY - JOUR

T1 - Dynamic Simulation Software for Prediction of Hydrogen Temperature and Pressure during Fueling Process

AU - Kuroki, Taichi

AU - Handa, Kiyoshi

AU - Monde, Masanori

AU - Yamaguchi, Shigehiro

AU - Shinzato, Kane'I

AU - Takata, Yasuyuki

AU - Sakoda, Naoya

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In this study, in order to relax the pre-cooling regulations at hydrogen fueling stations, we develop a software algorithm to simulate an actual hydrogen fueling process to Fuel Cell Vehicle (FCV) tanks. The simulation model in the software consists of the same filling equipment found at an actual hydrogen fueling station. Additionally, the same supply conditions (pre-cooling temperature, pressure and mass flow rate) as at a hydrogen fueling station were set to the simulation model. Based on the supply conditions, the software simulates the temperature and pressure of hydrogen in each part of filling equipment. In order to verify the accuracy of the software, we compare the temperature and pressure simulated at each stage of the filling process with experimental data. We show that by using the software it is possible to accurately calculate the hydrogen temperature and pressure at each point during the fueling process. Subsequently, we carry out a sensitive analysis of the filling equipment with large heat capacity, the initial temperature in the FCV tank and the pre-cooling temperature, and then propose an effective step to relax the regulation regarding the pre-cooling temperature. KeywordsFilling equipment, Hydrogen fueling station, Hydrogen temperature, Hydrogen pressure, Pre-cooling temperature.

AB - In this study, in order to relax the pre-cooling regulations at hydrogen fueling stations, we develop a software algorithm to simulate an actual hydrogen fueling process to Fuel Cell Vehicle (FCV) tanks. The simulation model in the software consists of the same filling equipment found at an actual hydrogen fueling station. Additionally, the same supply conditions (pre-cooling temperature, pressure and mass flow rate) as at a hydrogen fueling station were set to the simulation model. Based on the supply conditions, the software simulates the temperature and pressure of hydrogen in each part of filling equipment. In order to verify the accuracy of the software, we compare the temperature and pressure simulated at each stage of the filling process with experimental data. We show that by using the software it is possible to accurately calculate the hydrogen temperature and pressure at each point during the fueling process. Subsequently, we carry out a sensitive analysis of the filling equipment with large heat capacity, the initial temperature in the FCV tank and the pre-cooling temperature, and then propose an effective step to relax the regulation regarding the pre-cooling temperature. KeywordsFilling equipment, Hydrogen fueling station, Hydrogen temperature, Hydrogen pressure, Pre-cooling temperature.

UR - http://www.scopus.com/inward/record.url?scp=85045476355&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85045476355&partnerID=8YFLogxK

U2 - 10.4271/2018-01-1304

DO - 10.4271/2018-01-1304

M3 - Conference article

AN - SCOPUS:85045476355

VL - 2018-April

JO - SAE Technical Papers

JF - SAE Technical Papers

SN - 0148-7191

ER -