Effect of devolatilization model on flame structure of pulverized coal combustion in a jet-burner system

研究成果: ジャーナルへの寄稿記事

抄録

A numerical simulation was performed with the two competing model in the devolatilization process for a pulverized coal combustion jet flame by means of LES. The target was a simple jet burner flame in CRIEPI. To solve the LES equations, a CFD code FFR. Comb was employed with the dynamic Smagorinsky SGS turbulent model. A simple global kinetic mechanism was implemented to predict combustion of the gas and solid phase combustion. The interactions between the two phases were calculated by PSI-Cell model while the reaction rate in turbulent flow was established by SSFRRM. The simulation was validated by comparing results to the experimental data in terms of particle dispersion and velocity as well as gaseous velocity. The flame structure was discussed with temperature, mole fraction of major species. In addition, the effect of the devolatilization model was investigated simultaneously by comparing to another simulation that employed the single first order reaction model because the devolatilization was one of the major processes in coal combustion and it had an influence on the flame structure from all reactive regions. The release rate was calculated by two different parameter sets in the Arrhenius rate equation for the two competing model that were corresponding different temperature regions whereas the released rate was determined by only one fixed parameter set in the single first order reaction model. From the simulation, it was revealed that the main reactions took place at the upstream and the first fuel oxidation was stronger at the inner reaction zone comparing to the far side combustion. It was confirmed as well that the two competing model could capture the quick devolatilization faster than the single first order reaction model though the dominant part appeared later than the single first order reaction model.

元の言語英語
ページ(範囲)1973-1979
ページ数7
ジャーナルJournal of Mechanical Science and Technology
33
発行部数4
DOI
出版物ステータス出版済み - 4 1 2019

Fingerprint

Coal combustion
Fuel burners
Turbulent flow
Reaction rates
Computational fluid dynamics
Oxidation
Temperature
Kinetics

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering

これを引用

@article{6b7afb90a3894e66b80b2ffc9da86d78,
title = "Effect of devolatilization model on flame structure of pulverized coal combustion in a jet-burner system",
abstract = "A numerical simulation was performed with the two competing model in the devolatilization process for a pulverized coal combustion jet flame by means of LES. The target was a simple jet burner flame in CRIEPI. To solve the LES equations, a CFD code FFR. Comb was employed with the dynamic Smagorinsky SGS turbulent model. A simple global kinetic mechanism was implemented to predict combustion of the gas and solid phase combustion. The interactions between the two phases were calculated by PSI-Cell model while the reaction rate in turbulent flow was established by SSFRRM. The simulation was validated by comparing results to the experimental data in terms of particle dispersion and velocity as well as gaseous velocity. The flame structure was discussed with temperature, mole fraction of major species. In addition, the effect of the devolatilization model was investigated simultaneously by comparing to another simulation that employed the single first order reaction model because the devolatilization was one of the major processes in coal combustion and it had an influence on the flame structure from all reactive regions. The release rate was calculated by two different parameter sets in the Arrhenius rate equation for the two competing model that were corresponding different temperature regions whereas the released rate was determined by only one fixed parameter set in the single first order reaction model. From the simulation, it was revealed that the main reactions took place at the upstream and the first fuel oxidation was stronger at the inner reaction zone comparing to the far side combustion. It was confirmed as well that the two competing model could capture the quick devolatilization faster than the single first order reaction model though the dominant part appeared later than the single first order reaction model.",
author = "Seongyool Ahn and Hiroaki Watanabe and Toshiaki Kitagawa",
year = "2019",
month = "4",
day = "1",
doi = "10.1007/s12206-019-0347-5",
language = "English",
volume = "33",
pages = "1973--1979",
journal = "Journal of Mechanical Science and Technology",
issn = "1738-494X",
number = "4",

}

TY - JOUR

T1 - Effect of devolatilization model on flame structure of pulverized coal combustion in a jet-burner system

AU - Ahn, Seongyool

AU - Watanabe, Hiroaki

AU - Kitagawa, Toshiaki

PY - 2019/4/1

Y1 - 2019/4/1

N2 - A numerical simulation was performed with the two competing model in the devolatilization process for a pulverized coal combustion jet flame by means of LES. The target was a simple jet burner flame in CRIEPI. To solve the LES equations, a CFD code FFR. Comb was employed with the dynamic Smagorinsky SGS turbulent model. A simple global kinetic mechanism was implemented to predict combustion of the gas and solid phase combustion. The interactions between the two phases were calculated by PSI-Cell model while the reaction rate in turbulent flow was established by SSFRRM. The simulation was validated by comparing results to the experimental data in terms of particle dispersion and velocity as well as gaseous velocity. The flame structure was discussed with temperature, mole fraction of major species. In addition, the effect of the devolatilization model was investigated simultaneously by comparing to another simulation that employed the single first order reaction model because the devolatilization was one of the major processes in coal combustion and it had an influence on the flame structure from all reactive regions. The release rate was calculated by two different parameter sets in the Arrhenius rate equation for the two competing model that were corresponding different temperature regions whereas the released rate was determined by only one fixed parameter set in the single first order reaction model. From the simulation, it was revealed that the main reactions took place at the upstream and the first fuel oxidation was stronger at the inner reaction zone comparing to the far side combustion. It was confirmed as well that the two competing model could capture the quick devolatilization faster than the single first order reaction model though the dominant part appeared later than the single first order reaction model.

AB - A numerical simulation was performed with the two competing model in the devolatilization process for a pulverized coal combustion jet flame by means of LES. The target was a simple jet burner flame in CRIEPI. To solve the LES equations, a CFD code FFR. Comb was employed with the dynamic Smagorinsky SGS turbulent model. A simple global kinetic mechanism was implemented to predict combustion of the gas and solid phase combustion. The interactions between the two phases were calculated by PSI-Cell model while the reaction rate in turbulent flow was established by SSFRRM. The simulation was validated by comparing results to the experimental data in terms of particle dispersion and velocity as well as gaseous velocity. The flame structure was discussed with temperature, mole fraction of major species. In addition, the effect of the devolatilization model was investigated simultaneously by comparing to another simulation that employed the single first order reaction model because the devolatilization was one of the major processes in coal combustion and it had an influence on the flame structure from all reactive regions. The release rate was calculated by two different parameter sets in the Arrhenius rate equation for the two competing model that were corresponding different temperature regions whereas the released rate was determined by only one fixed parameter set in the single first order reaction model. From the simulation, it was revealed that the main reactions took place at the upstream and the first fuel oxidation was stronger at the inner reaction zone comparing to the far side combustion. It was confirmed as well that the two competing model could capture the quick devolatilization faster than the single first order reaction model though the dominant part appeared later than the single first order reaction model.

UR - http://www.scopus.com/inward/record.url?scp=85064463518&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85064463518&partnerID=8YFLogxK

U2 - 10.1007/s12206-019-0347-5

DO - 10.1007/s12206-019-0347-5

M3 - Article

VL - 33

SP - 1973

EP - 1979

JO - Journal of Mechanical Science and Technology

JF - Journal of Mechanical Science and Technology

SN - 1738-494X

IS - 4

ER -