Effect of electrolysis condition on the lightness and surface morphology of Ni deposit from chloride electro-winning solutions

Ryo Takahashi, Yuki Sato, Satoshi Oue, Shinichi Heguri, Hiroaki Nakano

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

抄録

To investigate the effects of current density and pH of the solution on the lightness and surface morphology of Ni deposit, Ni electrodeposition was performed at a current density of 100 to 500 A•m-2 and 7.2 × 105 C•m-2 of charge, in an unagitated chloride solution with pH 1 to 3, at 333 K. The composition and structure of the surface of deposits were analyzed by radio frequency glow discharge optical emission spectroscopy and three-dimensional scanning electron microscope (3D-SEM). The lightness of the Ni deposit decreased with increasing pH, and was also related to the current density with the minimum reached at 300 A•m-2. The concentration of the surface oxygen in the deposits increased with pH, with the highest value obtained at 300 A•m-2, which shows that the concentration of surface oxygen possibly affects the lightness. On the other hand, the surface of the Ni deposit was composed of several micrometers of pyramidal microcrystals and the mound formed by the aggregation of pyramidal microcrystals. To separate the two types of structural units, the deposits were cut every 200nm from the top in the thickness direction using 3D SEM. The number and area of the deposits in the cutting plane were measured and it was found that the lightness of the Ni deposit depended on the surface structure. Therefore, the lightness of the Ni deposit seems to depend on both the surface oxygen content and the microstructure of the deposits.

元の言語英語
ページ(範囲)1199-1206
ページ数8
ジャーナルMaterials Transactions
56
発行部数8
DOI
出版物ステータス出版済み - 1 1 2015

Fingerprint

electrolysis
Electrolysis
Surface morphology
Chlorides
Deposits
chlorides
deposits
Microcrystals
Current density
microcrystals
current density
Oxygen
oxygen
Optical emission spectroscopy
Scanning electron microscopy
scanning electron microscopy
Glow discharges
optical emission spectroscopy
Electrodeposition
Surface structure

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

これを引用

Effect of electrolysis condition on the lightness and surface morphology of Ni deposit from chloride electro-winning solutions. / Takahashi, Ryo; Sato, Yuki; Oue, Satoshi; Heguri, Shinichi; Nakano, Hiroaki.

:: Materials Transactions, 巻 56, 番号 8, 01.01.2015, p. 1199-1206.

研究成果: ジャーナルへの寄稿記事

@article{4ef4b218475341979d39e715632b9a24,
title = "Effect of electrolysis condition on the lightness and surface morphology of Ni deposit from chloride electro-winning solutions",
abstract = "To investigate the effects of current density and pH of the solution on the lightness and surface morphology of Ni deposit, Ni electrodeposition was performed at a current density of 100 to 500 A•m-2 and 7.2 × 105 C•m-2 of charge, in an unagitated chloride solution with pH 1 to 3, at 333 K. The composition and structure of the surface of deposits were analyzed by radio frequency glow discharge optical emission spectroscopy and three-dimensional scanning electron microscope (3D-SEM). The lightness of the Ni deposit decreased with increasing pH, and was also related to the current density with the minimum reached at 300 A•m-2. The concentration of the surface oxygen in the deposits increased with pH, with the highest value obtained at 300 A•m-2, which shows that the concentration of surface oxygen possibly affects the lightness. On the other hand, the surface of the Ni deposit was composed of several micrometers of pyramidal microcrystals and the mound formed by the aggregation of pyramidal microcrystals. To separate the two types of structural units, the deposits were cut every 200nm from the top in the thickness direction using 3D SEM. The number and area of the deposits in the cutting plane were measured and it was found that the lightness of the Ni deposit depended on the surface structure. Therefore, the lightness of the Ni deposit seems to depend on both the surface oxygen content and the microstructure of the deposits.",
author = "Ryo Takahashi and Yuki Sato and Satoshi Oue and Shinichi Heguri and Hiroaki Nakano",
year = "2015",
month = "1",
day = "1",
doi = "10.2320/matertrans.M2014432",
language = "English",
volume = "56",
pages = "1199--1206",
journal = "Materials Transactions",
issn = "0916-1821",
publisher = "The Japan Institute of Metals and Materials",
number = "8",

}

TY - JOUR

T1 - Effect of electrolysis condition on the lightness and surface morphology of Ni deposit from chloride electro-winning solutions

AU - Takahashi, Ryo

AU - Sato, Yuki

AU - Oue, Satoshi

AU - Heguri, Shinichi

AU - Nakano, Hiroaki

PY - 2015/1/1

Y1 - 2015/1/1

N2 - To investigate the effects of current density and pH of the solution on the lightness and surface morphology of Ni deposit, Ni electrodeposition was performed at a current density of 100 to 500 A•m-2 and 7.2 × 105 C•m-2 of charge, in an unagitated chloride solution with pH 1 to 3, at 333 K. The composition and structure of the surface of deposits were analyzed by radio frequency glow discharge optical emission spectroscopy and three-dimensional scanning electron microscope (3D-SEM). The lightness of the Ni deposit decreased with increasing pH, and was also related to the current density with the minimum reached at 300 A•m-2. The concentration of the surface oxygen in the deposits increased with pH, with the highest value obtained at 300 A•m-2, which shows that the concentration of surface oxygen possibly affects the lightness. On the other hand, the surface of the Ni deposit was composed of several micrometers of pyramidal microcrystals and the mound formed by the aggregation of pyramidal microcrystals. To separate the two types of structural units, the deposits were cut every 200nm from the top in the thickness direction using 3D SEM. The number and area of the deposits in the cutting plane were measured and it was found that the lightness of the Ni deposit depended on the surface structure. Therefore, the lightness of the Ni deposit seems to depend on both the surface oxygen content and the microstructure of the deposits.

AB - To investigate the effects of current density and pH of the solution on the lightness and surface morphology of Ni deposit, Ni electrodeposition was performed at a current density of 100 to 500 A•m-2 and 7.2 × 105 C•m-2 of charge, in an unagitated chloride solution with pH 1 to 3, at 333 K. The composition and structure of the surface of deposits were analyzed by radio frequency glow discharge optical emission spectroscopy and three-dimensional scanning electron microscope (3D-SEM). The lightness of the Ni deposit decreased with increasing pH, and was also related to the current density with the minimum reached at 300 A•m-2. The concentration of the surface oxygen in the deposits increased with pH, with the highest value obtained at 300 A•m-2, which shows that the concentration of surface oxygen possibly affects the lightness. On the other hand, the surface of the Ni deposit was composed of several micrometers of pyramidal microcrystals and the mound formed by the aggregation of pyramidal microcrystals. To separate the two types of structural units, the deposits were cut every 200nm from the top in the thickness direction using 3D SEM. The number and area of the deposits in the cutting plane were measured and it was found that the lightness of the Ni deposit depended on the surface structure. Therefore, the lightness of the Ni deposit seems to depend on both the surface oxygen content and the microstructure of the deposits.

UR - http://www.scopus.com/inward/record.url?scp=84938399125&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84938399125&partnerID=8YFLogxK

U2 - 10.2320/matertrans.M2014432

DO - 10.2320/matertrans.M2014432

M3 - Article

VL - 56

SP - 1199

EP - 1206

JO - Materials Transactions

JF - Materials Transactions

SN - 0916-1821

IS - 8

ER -