Effect of Equal-Channel Angular Pressing (ECAP) on creep in aluminium alloys

V. Sklenicka, J. Dvorak, M. Kvapilova, M. Svoboda, P. Kral, I. Saxl, Z. Horita

研究成果: 著書/レポートタイプへの貢献会議での発言

30 引用 (Scopus)

抜粋

This paper examines the effect of equal-channel angular pressing (ECAP) on creep behaviour of pure aluminium, binary Al-0.2wt.%Sc alloy and ternary Al-3wt.%Mg-0.2wt.%Sc alloy. The ECAP was conducted at room temperature with a die that had a 90° angle between the channels and 8 repetitive ECAP passes followed route Bc. Constant stress compression creep tests were performed at 473 K and stresses ranging between 16 to 80 MPa on ECAP materials and, for comparison purposes, on the initial coarse-grained materials. The results showed that the creep resistance of the ECAP processed Al-Sc and Al-Mg-Sc alloys was markedly deteriorated with respect to unpressed coarse-grained materials.

元の言語英語
ホスト出版物のタイトルSupplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006
出版者Trans Tech Publications Ltd
ページ2904-2909
ページ数6
エディションPART 3
ISBN(印刷物)0878494286, 9780878494286
DOI
出版物ステータス出版済み - 1 1 2007
イベント5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 - Vancouver, カナダ
継続期間: 7 4 20067 8 2006

出版物シリーズ

名前Materials Science Forum
番号PART 3
539-543
ISSN(印刷物)0255-5476

その他

その他5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006
カナダ
Vancouver
期間7/4/067/8/06

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Effect of Equal-Channel Angular Pressing (ECAP) on creep in aluminium alloys' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Sklenicka, V., Dvorak, J., Kvapilova, M., Svoboda, M., Kral, P., Saxl, I., & Horita, Z. (2007). Effect of Equal-Channel Angular Pressing (ECAP) on creep in aluminium alloys. : Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006 (PART 3 版, pp. 2904-2909). (Materials Science Forum; 巻数 539-543, 番号 PART 3). Trans Tech Publications Ltd. https://doi.org/10.4028/0-87849-428-6.2904