Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy

In Joon SON, Hiroaki Nakano, Satoshi Oue, Shigeo KOBAYASHI, Hisaaki FUKUSHIMA, Zenji Horita

研究成果: ジャーナルへの寄稿記事

22 引用 (Scopus)

抄録

The effect of equal-channel angular pressing(ECAP) on the pitting corrosion resistance of anodized Al-Cu alloy was investigated by electrochemical techniques in a solution containing 0.2 mol/L AlCl3 and also by surface analysis. Anodizing was conducted for 20 min at 200 and 400 A/m2 in a solution containing 1.53 mol/L H2SO4 and 0.018 5 mol/L Al2(SO4)3·16H2O at 20 °C. Anodized Al-Cu alloy was immediately dipped in boiling water for 20 min to seal the micro pores present in anodic oxide films. The time required before initiating pitting corrosion of anodized Al-Cu alloy is longer with ECAP than without, indicating that ECAP process improves the pitting corrosion resistance of anodized Al-Cu alloy. Second phase precipitates such as Si, Al-Cu-Mg and Al-Cu-Si-Fe-Mn intermetallic compounds are present in Al-Cu alloy and the size of these precipitates is greatly decreased by application of ECAP. Al-Cu-Mg intermetallic compounds are dissolved during anodization, whereas the precipitates composed of Si and Al-Cu-Si-Fe-Mn remain in anodic oxide films due to their more noble corrosion potential than Al. FE-SEM and EPMA observation reveal that the pitting corrosion of anodized Al-Cu alloy occurs preferentially around Al-Cu-Si-Fe-Mn intermetallic compounds, since the anodic oxide films are absent at the boundary between the normal oxide films and these impurity precipitates. The improvement of pitting corrosion resistance of anodized Al-Cu alloy processed by ECAP appears to be attributed to a decrease in the size of precipitates, which act as origins of pitting corrosion.

元の言語英語
ページ(範囲)904-908
ページ数5
ジャーナルTransactions of Nonferrous Metals Society of China (English Edition)
19
発行部数4
DOI
出版物ステータス出版済み - 8 1 2009

Fingerprint

Aluminum copper alloys
Equal channel angular pressing
copper alloys
pitting
pressing
Pitting
corrosion resistance
aluminum alloys
Corrosion resistance
corrosion
aluminum
copper
Precipitates
precipitates
Oxide films
oxide films
oxide
Corrosion
Intermetallics
intermetallics

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Geotechnical Engineering and Engineering Geology
  • Metals and Alloys
  • Materials Chemistry

これを引用

Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy. / SON, In Joon; Nakano, Hiroaki; Oue, Satoshi; KOBAYASHI, Shigeo; FUKUSHIMA, Hisaaki; Horita, Zenji.

:: Transactions of Nonferrous Metals Society of China (English Edition), 巻 19, 番号 4, 01.08.2009, p. 904-908.

研究成果: ジャーナルへの寄稿記事

@article{4e745c6b91da4d70ac5c6b293b459803,
title = "Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy",
abstract = "The effect of equal-channel angular pressing(ECAP) on the pitting corrosion resistance of anodized Al-Cu alloy was investigated by electrochemical techniques in a solution containing 0.2 mol/L AlCl3 and also by surface analysis. Anodizing was conducted for 20 min at 200 and 400 A/m2 in a solution containing 1.53 mol/L H2SO4 and 0.018 5 mol/L Al2(SO4)3·16H2O at 20 °C. Anodized Al-Cu alloy was immediately dipped in boiling water for 20 min to seal the micro pores present in anodic oxide films. The time required before initiating pitting corrosion of anodized Al-Cu alloy is longer with ECAP than without, indicating that ECAP process improves the pitting corrosion resistance of anodized Al-Cu alloy. Second phase precipitates such as Si, Al-Cu-Mg and Al-Cu-Si-Fe-Mn intermetallic compounds are present in Al-Cu alloy and the size of these precipitates is greatly decreased by application of ECAP. Al-Cu-Mg intermetallic compounds are dissolved during anodization, whereas the precipitates composed of Si and Al-Cu-Si-Fe-Mn remain in anodic oxide films due to their more noble corrosion potential than Al. FE-SEM and EPMA observation reveal that the pitting corrosion of anodized Al-Cu alloy occurs preferentially around Al-Cu-Si-Fe-Mn intermetallic compounds, since the anodic oxide films are absent at the boundary between the normal oxide films and these impurity precipitates. The improvement of pitting corrosion resistance of anodized Al-Cu alloy processed by ECAP appears to be attributed to a decrease in the size of precipitates, which act as origins of pitting corrosion.",
author = "SON, {In Joon} and Hiroaki Nakano and Satoshi Oue and Shigeo KOBAYASHI and Hisaaki FUKUSHIMA and Zenji Horita",
year = "2009",
month = "8",
day = "1",
doi = "10.1016/S1003-6326(08)60374-X",
language = "English",
volume = "19",
pages = "904--908",
journal = "Transactions of Nonferrous Metals Society of China",
issn = "1003-6326",
publisher = "Nonferrous Metals Society of China",
number = "4",

}

TY - JOUR

T1 - Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy

AU - SON, In Joon

AU - Nakano, Hiroaki

AU - Oue, Satoshi

AU - KOBAYASHI, Shigeo

AU - FUKUSHIMA, Hisaaki

AU - Horita, Zenji

PY - 2009/8/1

Y1 - 2009/8/1

N2 - The effect of equal-channel angular pressing(ECAP) on the pitting corrosion resistance of anodized Al-Cu alloy was investigated by electrochemical techniques in a solution containing 0.2 mol/L AlCl3 and also by surface analysis. Anodizing was conducted for 20 min at 200 and 400 A/m2 in a solution containing 1.53 mol/L H2SO4 and 0.018 5 mol/L Al2(SO4)3·16H2O at 20 °C. Anodized Al-Cu alloy was immediately dipped in boiling water for 20 min to seal the micro pores present in anodic oxide films. The time required before initiating pitting corrosion of anodized Al-Cu alloy is longer with ECAP than without, indicating that ECAP process improves the pitting corrosion resistance of anodized Al-Cu alloy. Second phase precipitates such as Si, Al-Cu-Mg and Al-Cu-Si-Fe-Mn intermetallic compounds are present in Al-Cu alloy and the size of these precipitates is greatly decreased by application of ECAP. Al-Cu-Mg intermetallic compounds are dissolved during anodization, whereas the precipitates composed of Si and Al-Cu-Si-Fe-Mn remain in anodic oxide films due to their more noble corrosion potential than Al. FE-SEM and EPMA observation reveal that the pitting corrosion of anodized Al-Cu alloy occurs preferentially around Al-Cu-Si-Fe-Mn intermetallic compounds, since the anodic oxide films are absent at the boundary between the normal oxide films and these impurity precipitates. The improvement of pitting corrosion resistance of anodized Al-Cu alloy processed by ECAP appears to be attributed to a decrease in the size of precipitates, which act as origins of pitting corrosion.

AB - The effect of equal-channel angular pressing(ECAP) on the pitting corrosion resistance of anodized Al-Cu alloy was investigated by electrochemical techniques in a solution containing 0.2 mol/L AlCl3 and also by surface analysis. Anodizing was conducted for 20 min at 200 and 400 A/m2 in a solution containing 1.53 mol/L H2SO4 and 0.018 5 mol/L Al2(SO4)3·16H2O at 20 °C. Anodized Al-Cu alloy was immediately dipped in boiling water for 20 min to seal the micro pores present in anodic oxide films. The time required before initiating pitting corrosion of anodized Al-Cu alloy is longer with ECAP than without, indicating that ECAP process improves the pitting corrosion resistance of anodized Al-Cu alloy. Second phase precipitates such as Si, Al-Cu-Mg and Al-Cu-Si-Fe-Mn intermetallic compounds are present in Al-Cu alloy and the size of these precipitates is greatly decreased by application of ECAP. Al-Cu-Mg intermetallic compounds are dissolved during anodization, whereas the precipitates composed of Si and Al-Cu-Si-Fe-Mn remain in anodic oxide films due to their more noble corrosion potential than Al. FE-SEM and EPMA observation reveal that the pitting corrosion of anodized Al-Cu alloy occurs preferentially around Al-Cu-Si-Fe-Mn intermetallic compounds, since the anodic oxide films are absent at the boundary between the normal oxide films and these impurity precipitates. The improvement of pitting corrosion resistance of anodized Al-Cu alloy processed by ECAP appears to be attributed to a decrease in the size of precipitates, which act as origins of pitting corrosion.

UR - http://www.scopus.com/inward/record.url?scp=68549090708&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68549090708&partnerID=8YFLogxK

U2 - 10.1016/S1003-6326(08)60374-X

DO - 10.1016/S1003-6326(08)60374-X

M3 - Article

VL - 19

SP - 904

EP - 908

JO - Transactions of Nonferrous Metals Society of China

JF - Transactions of Nonferrous Metals Society of China

SN - 1003-6326

IS - 4

ER -