Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

Kentaro Kudo, Hiroyoshi Ishimitsu, Jungho Choe, Toshiko Osada, Hideshi Miura, Kazunari Shinagawa

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

抄録

Metal injection molding (MIM) process offers net shape production and high cost efficiency in order to produce the materials with poor workability such as Ti-6Al-4V. In our previous studies, injection molded Ti-6Al-4V showed high tensile strength and elongation comparable to those of wrought materials. However, fatigue strength of injection molded Ti-6Al-4V was lower than that of wrought materials because of large grain size and retained pores. In this study, the grain size of MIM Ti-6Al-4V compacts was decreased by addition of TiB2 powder and using the fine powder. As a result, the 0.4 mass% Boron added compacts treated HIP showed the fine grain size. Therefore, 93 % of fatigue strength compared to that of wrought material was obtained. In addition, the relationship of grain size and fatigue strength showed good agreement with Hall-Petch relations.

本文言語英語
ホスト出版物のタイトルWorld PM 2016 Congress and Exhibition
出版社European Powder Metallurgy Association (EPMA)
ISBN(電子版)9781899072484
出版ステータス出版済み - 1 1 2016
イベントWorld Powder Metallurgy 2016 Congress and Exhibition, World PM 2016 - Hamburg, ドイツ
継続期間: 10 9 201610 13 2016

出版物シリーズ

名前World PM 2016 Congress and Exhibition

その他

その他World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016
Countryドイツ
CityHamburg
Period10/9/1610/13/16

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Metals and Alloys

フィンガープリント 「Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル