Effect of granulation condition and property of raw material on strength of granulated particle by tumbling granulation

Takayuki Maeda, Koki Nishioka, Masakata Shimizu

研究成果: ジャーナルへの寄稿記事

15 引用 (Scopus)

抄録

In order to clarify the factors on strength of granules for iron ore sinter, especially made of limonite iron ore, the effects of porosity, moisture and revolution speed of pelletizer on the strength of granules were examined with using reagent hematite. Moreover, using three kinds of commercial iron ores, the relationship between granule size and strength was examined. The strength measurement was undertaken before and after drying with a compression taster. The results obtained are follows: (1) In case of reagent hematite sample, the strength after drying became very low compared with that before drying. The compressive strength of sample just after granulation is determined by the adhesion force between hematite particles by liquid bridge of added water, but the strength after drying is maintained by the adhesion force by intertwined particles. (2) In case of commercial iron ores, the compressive strength after drying was very high compared with that in wet condition. (3) The cause for the different effect of drying on compressive strength between the commercial iron ore and reagent hematite seems to be the difference of gangue minerals that exist only in the iron ore and/or that of surface properties because the particle size distribution of reagent hematite and iron ores used is the same.

元の言語英語
ページ(範囲)625-630
ページ数6
ジャーナルISIJ International
49
発行部数5
DOI
出版物ステータス出版済み - 8 7 2009

Fingerprint

Barreling
Granulation
Iron ores
Hematite
Drying
Raw materials
Compressive strength
Iron ore sinter
Adhesion
Particle size analysis
Surface properties
Minerals
Moisture
Porosity
ferric oxide
Water
Liquids

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

これを引用

Effect of granulation condition and property of raw material on strength of granulated particle by tumbling granulation. / Maeda, Takayuki; Nishioka, Koki; Shimizu, Masakata.

:: ISIJ International, 巻 49, 番号 5, 07.08.2009, p. 625-630.

研究成果: ジャーナルへの寄稿記事

@article{fd408f375487451e8ee71aab24dbb669,
title = "Effect of granulation condition and property of raw material on strength of granulated particle by tumbling granulation",
abstract = "In order to clarify the factors on strength of granules for iron ore sinter, especially made of limonite iron ore, the effects of porosity, moisture and revolution speed of pelletizer on the strength of granules were examined with using reagent hematite. Moreover, using three kinds of commercial iron ores, the relationship between granule size and strength was examined. The strength measurement was undertaken before and after drying with a compression taster. The results obtained are follows: (1) In case of reagent hematite sample, the strength after drying became very low compared with that before drying. The compressive strength of sample just after granulation is determined by the adhesion force between hematite particles by liquid bridge of added water, but the strength after drying is maintained by the adhesion force by intertwined particles. (2) In case of commercial iron ores, the compressive strength after drying was very high compared with that in wet condition. (3) The cause for the different effect of drying on compressive strength between the commercial iron ore and reagent hematite seems to be the difference of gangue minerals that exist only in the iron ore and/or that of surface properties because the particle size distribution of reagent hematite and iron ores used is the same.",
author = "Takayuki Maeda and Koki Nishioka and Masakata Shimizu",
year = "2009",
month = "8",
day = "7",
doi = "10.2355/isijinternational.49.625",
language = "English",
volume = "49",
pages = "625--630",
journal = "ISIJ International",
issn = "0915-1559",
publisher = "Iron and Steel Institute of Japan",
number = "5",

}

TY - JOUR

T1 - Effect of granulation condition and property of raw material on strength of granulated particle by tumbling granulation

AU - Maeda, Takayuki

AU - Nishioka, Koki

AU - Shimizu, Masakata

PY - 2009/8/7

Y1 - 2009/8/7

N2 - In order to clarify the factors on strength of granules for iron ore sinter, especially made of limonite iron ore, the effects of porosity, moisture and revolution speed of pelletizer on the strength of granules were examined with using reagent hematite. Moreover, using three kinds of commercial iron ores, the relationship between granule size and strength was examined. The strength measurement was undertaken before and after drying with a compression taster. The results obtained are follows: (1) In case of reagent hematite sample, the strength after drying became very low compared with that before drying. The compressive strength of sample just after granulation is determined by the adhesion force between hematite particles by liquid bridge of added water, but the strength after drying is maintained by the adhesion force by intertwined particles. (2) In case of commercial iron ores, the compressive strength after drying was very high compared with that in wet condition. (3) The cause for the different effect of drying on compressive strength between the commercial iron ore and reagent hematite seems to be the difference of gangue minerals that exist only in the iron ore and/or that of surface properties because the particle size distribution of reagent hematite and iron ores used is the same.

AB - In order to clarify the factors on strength of granules for iron ore sinter, especially made of limonite iron ore, the effects of porosity, moisture and revolution speed of pelletizer on the strength of granules were examined with using reagent hematite. Moreover, using three kinds of commercial iron ores, the relationship between granule size and strength was examined. The strength measurement was undertaken before and after drying with a compression taster. The results obtained are follows: (1) In case of reagent hematite sample, the strength after drying became very low compared with that before drying. The compressive strength of sample just after granulation is determined by the adhesion force between hematite particles by liquid bridge of added water, but the strength after drying is maintained by the adhesion force by intertwined particles. (2) In case of commercial iron ores, the compressive strength after drying was very high compared with that in wet condition. (3) The cause for the different effect of drying on compressive strength between the commercial iron ore and reagent hematite seems to be the difference of gangue minerals that exist only in the iron ore and/or that of surface properties because the particle size distribution of reagent hematite and iron ores used is the same.

UR - http://www.scopus.com/inward/record.url?scp=68049122009&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=68049122009&partnerID=8YFLogxK

U2 - 10.2355/isijinternational.49.625

DO - 10.2355/isijinternational.49.625

M3 - Article

VL - 49

SP - 625

EP - 630

JO - ISIJ International

JF - ISIJ International

SN - 0915-1559

IS - 5

ER -