Effect of high-pressure torsion on the hydrogen evolution performances of a melt-spun amorphous Fe73.5Si13.5B9Cu1Nb3 alloy

Fei Chu, Kaiyao Wu, Yuying Meng, Kaveh Edalati, Huai Jun Lin

研究成果: Contribution to journalArticle査読

2 被引用数 (Scopus)

抄録

In this work, a melt-spun amorphous Fe73.5Si13.5B9Cu1Nb3 alloy is subjected to high-pressure torsion (HPT) treatment under 6 GPa in order to enhance the alkaline hydrogen evolution reaction (HER) performance. Different HPT turns, including 1, 2, 5 and 10, are selected and the samples are marked as HPT-1N, HPT-2N, HPT-5N and HPT-10 N, respectively. The HPT treatment can lead to a significant structural change such as partial crystallization and defect generation on the Fe-based amorphous alloy with a considerable increase in the HER electrocatalytic activity. The HPT-5N sample shows the best catalytic performance, with an overpotential of only 174 mV at 10 mA cm−2 current density in 1 M KOH, which is 244 mV lower than that of the melt-spun alloy at the same condition. Moreover, it was established that the HPT-treated amorphous alloy shows good stability during the HER cycling process.

本文言語英語
ページ(範囲)25029-25038
ページ数10
ジャーナルInternational Journal of Hydrogen Energy
46
49
DOI
出版ステータス出版済み - 7 16 2021

All Science Journal Classification (ASJC) codes

  • 再生可能エネルギー、持続可能性、環境
  • 燃料技術
  • 凝縮系物理学
  • エネルギー工学および電力技術

フィンガープリント

「Effect of high-pressure torsion on the hydrogen evolution performances of a melt-spun amorphous Fe<sub>73.5</sub>Si<sub>13.5</sub>B<sub>9</sub>Cu<sub>1</sub>Nb<sub>3</sub> alloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル