Al合金7075-T6押出し材の疲労き裂伝ぱ挙動に及ぼす湿度の影響

仮屋 孝二, 前田 季輝, 皮籠石 紀雄, 陳 強, 中村 祐三, 森野 数博

研究成果: Contribution to journalArticle査読

抄録

In order to investigate the effects of humidity change and loading frequency on growth behavior of a fatigue crack of an extruded bar of an age-hardened Al alloy 7075-T6, rotating bending fatigue tests were carried out in relative humidity of 25% and 85% at frequencies of 50Hz and 6Hz. At 50Hz, macroscopic appearances of fractures were a shear mode at high stress levels in high humidity, though those were a tensile mode in other conditions of humidity and stress levels. The crack growth rate was accelerated by high humidity. By changing humidity, both of the growth rate and the growth mode of a crack were immediately changed to those corresponding to the changed humidity. That is, the growth behavior and fatigue life under humidity change may be estimated by those in constant humidity. Fatigue life in high humidity at 6Hz was longer than that at 50Hz in spite of accelerations of both of the crack initiation and its growth rate in the early growth process in high humidity at both frequency, though there was no or little influence of frequency on fatigue life in low humidity. Moreover, the crack propagated in the tensile mode even at high stress levels where the shear mode crack propagated at 50Hz. These results were explained by the effect of hydrogen on the crack growth behavior.
寄稿の翻訳タイトルEffect of Humidity on Growth Behavior of a Fatigue Crack of 7075-T6 Extruded Al Alloy
本文言語日本語
ページ(範囲)712-718
ページ数7
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
61
8
DOI
出版ステータス出版済み - 2012

フィンガープリント

「Al合金7075-T6押出し材の疲労き裂伝ぱ挙動に及ぼす湿度の影響」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル